Evaluation On Machining Performance Of AISI 1045 Steel Under Dry Condition
Surface integrity and tool wear is important to determine the quality of machine surface in order to achieve optimum cutting parameter. This project was conducted to study the optimum of cutting parameters on tool wear and surface roughness using AISI 1045 steel under dry turning process. The cuttin...
類似資料
Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
著者:: Mazda, Nur Syahirah
出版事項: (2018)
著者:: Mazda, Nur Syahirah
出版事項: (2018)
Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition
著者:: Norfauzi, Tamin
出版事項: (2017)
著者:: Norfauzi, Tamin
出版事項: (2017)
Optimization on milling machining performances of AISI D2 steel using Taguchi method
著者:: Ismail, Riduan
出版事項: (2020)
著者:: Ismail, Riduan
出版事項: (2020)
Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM
著者:: Mansoor, Mohd Sufriansyah
出版事項: (2019)
著者:: Mansoor, Mohd Sufriansyah
出版事項: (2019)
Machinability assessment when turning AISI 316L austenitic stainless steel using uncoated and coated carbide inserts
著者:: Nur, Rusdi
出版事項: (2016)
著者:: Nur, Rusdi
出版事項: (2016)
The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process
著者:: Juwara, Luqman Nul Hakim
出版事項: (2016)
著者:: Juwara, Luqman Nul Hakim
出版事項: (2016)
Performance of minimum quantity lubrication using paraffin based nanofluids during hard turning of AISI420 stainless steel
著者:: Majeed, Faraj Saeid Adrees
出版事項: (2022)
著者:: Majeed, Faraj Saeid Adrees
出版事項: (2022)
Effect of cutting parameters on the surface integrity of ground AISI 1148 steel
著者:: Ismail, Mohd. Rozaimi
出版事項: (2010)
著者:: Ismail, Mohd. Rozaimi
出版事項: (2010)
Creep-rupture behavior of AISI 347 austenitic stainless steel foils at different temperature and stress levels
著者:: Osman, Ali Hassan
出版事項: (2011)
著者:: Osman, Ali Hassan
出版事項: (2011)
Performance and evaluation of graphite when machining hardened steel ASSAB 718
著者:: Saeed Ahmed, Radwan Ahmed
出版事項: (2009)
著者:: Saeed Ahmed, Radwan Ahmed
出版事項: (2009)
Performance evaluation of electrical discharge machining on stainless steel 316L using copper impregnated graphite
著者:: Safiei, Wahaizad
出版事項: (2014)
著者:: Safiei, Wahaizad
出版事項: (2014)
Disc brake squeal generation during dry and wet conditions
著者:: Waheed, Muneer Naji
出版事項: (2014)
著者:: Waheed, Muneer Naji
出版事項: (2014)
Effect of machining parameters and bismuth addition on al-20%mg2si machinability during dry turning
著者:: Razavykia, Abbas
出版事項: (2014)
著者:: Razavykia, Abbas
出版事項: (2014)
Surface Roughness Study On Mild Steel In Conventional Turning Process Under Three Condition Cutting Fluids
著者:: Abdullah, Abd Halimnizam
出版事項: (2019)
著者:: Abdullah, Abd Halimnizam
出版事項: (2019)
Determination of safety inventory under uncertain conditions
著者:: Le Tran, Trung Kien
出版事項: (2012)
著者:: Le Tran, Trung Kien
出版事項: (2012)
Performance evaluation of wire electrode discharge machining (WEDM) On Inconel 718
著者:: Ali, Mohd. Nizam
出版事項: (2010)
著者:: Ali, Mohd. Nizam
出版事項: (2010)
Characterization and Parametric Evaluation of Wire Electrical Discharge Machining of Cold Work Tool Steels
著者:: Abdul Rahim, Mohd Aidil Shah
出版事項: (2019)
著者:: Abdul Rahim, Mohd Aidil Shah
出版事項: (2019)
Performance evaluation of wire electro-discharge machining on tungsten carbide
著者:: Hassan, Mas Ayu
出版事項: (2006)
著者:: Hassan, Mas Ayu
出版事項: (2006)
Evaluation of ceramic cutting tool performance when turning tool steels
著者:: Konneh, Mohamed
出版事項: (1998)
著者:: Konneh, Mohamed
出版事項: (1998)
Integration chatter avoidance and minimum quantity lubrication condition in machining process
著者:: Wan Mohd Azlan, Wan Mohd Nowalid
出版事項: (2019)
著者:: Wan Mohd Azlan, Wan Mohd Nowalid
出版事項: (2019)
Damage evolution of ball bearings under fatigue loading conditions
著者:: Md. Yasin, Anuar Syamsi
出版事項: (2001)
著者:: Md. Yasin, Anuar Syamsi
出版事項: (2001)
Biodiesel combustion characteristics under reacting swirl spray condition
著者:: Chiong, Meng Choung
出版事項: (2019)
著者:: Chiong, Meng Choung
出版事項: (2019)
Pack cementation of high chromium steel for high temperature application in steam condition
著者:: Farah Alia, Fauzi
出版事項: (2018)
著者:: Farah Alia, Fauzi
出版事項: (2018)
Development and performance evaluation of bioluricant enhanced with nanoparticles for sustainable machining application
著者:: Sadiq, Ibrahim Ogu
出版事項: (2022)
著者:: Sadiq, Ibrahim Ogu
出版事項: (2022)
Performance evaluation of ceramic and PCBN cutting tools when turning hardened steel
著者:: Abd. Jamil, Saiful Bahri
出版事項: (2004)
著者:: Abd. Jamil, Saiful Bahri
出版事項: (2004)
Performance evaluation of coated carbide cutting tools when turning hardened tool steel
著者:: Tang, Yu Cai
出版事項: (2006)
著者:: Tang, Yu Cai
出版事項: (2006)
Performance evaluation of wiper coated ceramic tool when hard turning tool steel
著者:: Saad Elmunafi, Mohamed Handawi
出版事項: (2010)
著者:: Saad Elmunafi, Mohamed Handawi
出版事項: (2010)
Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel
著者:: Keeran, Anamalai
出版事項: (2019)
著者:: Keeran, Anamalai
出版事項: (2019)
Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
著者:: Mohd. Yusof, Noordin
出版事項: (2004)
著者:: Mohd. Yusof, Noordin
出版事項: (2004)
Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
著者:: Mohd. Yusof, Noordin
出版事項: (2003)
著者:: Mohd. Yusof, Noordin
出版事項: (2003)
Biotribocorrosion performance of titanium alloy Ti-6AI-4V and stainless steel 316l under simulated body environment
著者:: Alias, Juliawati
出版事項: (2008)
著者:: Alias, Juliawati
出版事項: (2008)
Predictive modelling of machining parameters of S45C mild steel
著者:: Abbas, Adnan Jameel
出版事項: (2016)
著者:: Abbas, Adnan Jameel
出版事項: (2016)
Optimization of drill geometry design for orthopedic surgical application in dry drilling condition
著者:: Mohd Samsuddin, Noorazizi
出版事項: (2017)
著者:: Mohd Samsuddin, Noorazizi
出版事項: (2017)
Performance evaluation of electrical discharge machine on titanium alloy using copper impregnated graphite electrode
著者:: Mohd. Isa @ Hamid, Mohd. Halimudin
出版事項: (2010)
著者:: Mohd. Isa @ Hamid, Mohd. Halimudin
出版事項: (2010)
Performance evaluation of nitrogen gas-assisted laser cutting on 316L austenitic stainless steel plate
著者:: Abd. Halim, Shahrizal
出版事項: (2010)
著者:: Abd. Halim, Shahrizal
出版事項: (2010)
Evaluation and modelling of machined wood surface roughness and fuzziness
著者:: Tan, Poh Lai
出版事項: (2011)
著者:: Tan, Poh Lai
出版事項: (2011)
Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
著者:: Mohd Noor Firdaus, Haron
出版事項: (2021)
著者:: Mohd Noor Firdaus, Haron
出版事項: (2021)
Performance evaluation of coated ceramic cutting tools with T-land edge preparation when turning hardened tool steel
著者:: Wan Abdul Rahaman, Wan Emri
出版事項: (2006)
著者:: Wan Abdul Rahaman, Wan Emri
出版事項: (2006)
Multi Objective Performance Optimization Of Hybrid Rotary Ultrasonic Assisted End Milling For Machining Hardened Steel Material
著者:: Ramli, Azlan
出版事項: (2020)
著者:: Ramli, Azlan
出版事項: (2020)
Machining performance of 22MnB5 Boron steel cutting tool with Al 6061 Aluminium Alloy
著者:: Mohd Rashid, Mohd Fairuz
出版事項: (2021)
著者:: Mohd Rashid, Mohd Fairuz
出版事項: (2021)
類似資料
-
Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
著者:: Mazda, Nur Syahirah
出版事項: (2018) -
Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition
著者:: Norfauzi, Tamin
出版事項: (2017) -
Optimization on milling machining performances of AISI D2 steel using Taguchi method
著者:: Ismail, Riduan
出版事項: (2020) -
Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM
著者:: Mansoor, Mohd Sufriansyah
出版事項: (2019) -
Machinability assessment when turning AISI 316L austenitic stainless steel using uncoated and coated carbide inserts
著者:: Nur, Rusdi
出版事項: (2016)