Cost Comparison Between Stone Mastic Aspahlt (Sma) And Asphalt Concrete Wearing Course (Acw20)
Stone Mastic Asphalt (SMA) technology has been introduced to Malaysian construction industry since the 1990s. Since then, several trial lay projects were carried out to study the performance of the mix. However the acceptability of SMA among local road agency is quite discouraging due to previous...
| Auteur principal: | |
|---|---|
| Format: | Thèse |
| Langue: | anglais anglais |
| Publié: |
2005
|
| Sujets: | |
| Accès en ligne: | http://psasir.upm.edu.my/id/eprint/12232/1/FK_2005_14_.pdf |
| Résumé: | Stone Mastic Asphalt (SMA) technology has been introduced to Malaysian
construction industry since the 1990s. Since then, several trial lay projects were
carried out to study the performance of the mix. However the acceptability of
SMA among local road agency is quite discouraging due to previous reports on
the high cost of SMA. However a Malaysian study reported that the
construction cost of SMA is actually 10 % to 15% less than the conventional
mix. Hence, the study aims to clarify this matter by comparing the construction
cost of SMA and ACW20 by using significant cost elements identified by a
multiple regression analysis. The analysis covered 27 SMA and ACW20
projects in Selangor. Cost data was collected via a standardized questionnaire.
The result indicates that the construction cost of SMA can be comparable to
ACW20 if the material cost does not exceed RM 102/ton and the thickness
does not exceed 35 mm. Finally, the study revealed that the construction cost
of a thinner SMA layer can be made compatible with the conventional mix.
Furthermore a thin SMA layer performs much better than thicker asphalt
concrete surfacing as indicated by various local and overseas studies. |
|---|