Numerical investigation of laminar flow and thermal characteristics of tangential cooling air jet in a sudden expansion channel

This thesis describes a study of tangential jet flow in a sudden expansion channel referred to as a Backward Facing Step (BFS). A two dimensional laminar air flow was investigated numerically by introducing a cooling air flow injected tangentially through a slot on the step. The goal of the study is...

Description complète

Détails bibliographiques
Auteur principal:	Pishgahi, Asghar
Format:	Thèse
Langue:	anglais
Publié:	2012
Sujets:	Aerodynamics Laminar flow Polymers - Thermal properties
Accès en ligne:	http://psasir.upm.edu.my/id/eprint/48471/1/FK%202012%20117R.pdf

Documents similaires

Numerical study of two-dimensional steady incompressible laminar flow over a backward-facing step at moderate reynolds number
par: Sinnasamy, Yogeswaran
Publié: (2012)

Development of an Experimental Facility for Measurement of Tangential Jet Flow in a Sudden Expansion Channel
par: Abd Rahim, Irfan
Publié: (2006)

Performance characteristics in transonic axial compressor rotor blade using circular jets
par: Epsipha, Pauline
Publié: (2016)

Effect of surface roughness on helicopter main rotor blade
par: Wan Rohizan, Wan Norhafizan
Publié: (2017)

Stability and Control Assessment of an Aerial Target Drone Based on a Scale Model of A-4 Skyhawk Jet Fighter
par: Bakar, Abu Zaid
Publié: (2009)

Synthesis and investigation of electrical and thermal properties of conducting polymer polypyrole and polypyrole / multiwall carbon nanotube composites
par: Shabestari, Afarin Bahrami
Publié: (2012)

Numerical assessment of coanda effect for wind turbine application
par: Abdul Hamid, Mohd Faisal
Publié: (2012)

Longitudinal Aerodynamic Characteristics of an Aircraft Model with and Without Winglet
par: Hossain, Md. Altab
Publié: (2005)

Electrical Characteristics And Thermal Diffusivity Of Polypyrrole-Based Conducting Polymer
par: Othman, Norfazlinayati
Publié: (2010)

Numerical simulation of tangential flow flameless combustion process
par: Hamidi, Ehsan
Publié: (2014)

Experimental And Numerical Analysis On The Cooling Performance Of Synthetic Jet At Low Reynolds Number
par: Ho, Roger Zhen Yu
Publié: (2018)

Mechanical characterization of polymer parts produced via multi-jet printing and fused deposition modelling
par: Wahid, Zaliha
Publié: (2021)

Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
par: Aftab, Syed Mohammed Aminuddin
Publié: (2017)

Convection Boundary Layer Flows Over Needles and Cylinders in Viscous Fluids
par: Ahmad, Syakila
Publié: (2009)

Effects of aerodynamic loading on thin substructure within transonic region of subsonic aircraft
par: Abdul Rahman, Umran
Publié: (2018)

Lift and drag improvements of airfoil through utilization of rough surface at trailing edge
par: Mahmud, Abdullah Saad
Publié: (2014)

Behaviour of symmetrical and asymmetrical geometries in fully immersed flow / Fauziah Jerai @ Junaidi
par: Jerai@Junaidi, Fauziah
Publié: (2007)

Aeroelastic flutter performance of shape memory alloy embedded 3D woven composite plate under subsonic flow
par: Baitab, Danish Mahmood
Publié: (2021)

Study of short period behaviour for BWB UAV / Mohd Safuan Rosli.
par: Rosli, Mohd Safuan
Publié: (2009)

Vehicular traffic noise prediction and propagation modelling using artificial neural network
par: Ahmed, Ahmed Abdulkareem
Publié: (2018)

Sizing and analysis of pulsejet engine for unmanned aerial vehicle
par: Ahmadian, Sevda
Publié: (2012)

Computational fluid analysis of flow around a finite height circular cylinder using splitter plate
par: Mahjoub, Babak
Publié: (2015)

Analysis of aerodynamic performance through flow simulation on x-plane with store-x
par: A.Rahman, Mahadhir
Publié: (2019)

To study and simulate the concept of ramjet / Amiruddin Amkaromi
par: Amkaromi, Amiruddin
Publié: (2005)

Numerical prediction of laminar nanofluid flow in rectangular microchannel
par: Abubakar, Saidu Bello
Publié: (2014)

Numerical And Experimental Studies On Production Of Fine Silica In An Opposed Fluidized Bed Air Jet Mill
par: Munusamy, Sri Raj Rajeswari
Publié: (2011)

Comparative Evaluation Of Three Methods For Predicting Traffic Volume
par: Zaman, Seyed Ali
Publié: (2008)

Development of divergent viscous wall damper for framed structures under dynamic loading
par: Khoshkroudi, Soheil Nikpour
Publié: (2016)

Damage severity evaluation methods for biocomposite vertical axis wind turbine blades due to lightning strikes
par: Mat Daud, Siti Zubaidah
Publié: (2018)

Development of Hot Wire-Laser Beam Displacement Technique for Determining Thermal Conductivity and Thermal Diffusivity of Nanofluids
par: Mohammed Ali, Faris
Publié: (2011)

Laminar nanofluid flow over periodic two dimensional rectangular baffled channels
par: Osia, Seyedel
Publié: (2013)

Evaluation of the tensile properties for polypropylene composite – a finite element and mechanic studies / Husnani Hamid
par: Hamid, Husnani
Publié: (2020)

Development of refrigerant (R32) flow maldistribution model for microchannel heat exchanger
par: Chng, Ming Hui
Publié: (2016)

Evaluation of sustainable groundwater extraction for water intake using visual modflow at Tanjung Mas
par: Mhd Ramzam, Muhammad Aidil Hakim
Publié: (2020)

Design, analysis and fabrication of two axis motorized bench / Mohd Adlan Shamsuddin
par: Shamsuddin, Mohd Adlan
Publié: (2010)

Expandable polystyrene (EPS) foam filled epoxy composite / Rabiatul Manisah Mohamed
par: Mohamed, Rabiatul Manisah
Publié: (2008)

Analysis of cooling performance for air cooling channels of a PEM fuel cells using CFD / Mohd Hafizi Mohd Din
par: Mohd Din, Mohd Hafizi
Publié: (2010)

Optimisation of hybrid microchannel heat sink with secondary channel under laminar flow condition
par: Aziz Japar, Wan Mohd. Arif
Publié: (2022)

Notched strength of fiber-reinforced polymer (FRP) / Norhazwan Norizan
par: Norizan, Norhazwan
Publié: (2005)

Thermal diffusivity of small volume liquids using a converging thermal wave technique
par: Soltaninejad, Sepideh
Publié: (2013)