Analysis Of Vibration Signals And Surface Characteristics Of Cylindrical Roller Bearing

This work aims to establish the relation between the vibration level and the surface roughness of the bearing running under lightly oiled, greased and dry conditions. Kajian ini dijalankan untuk mengesahkan kaitan antara paras getaran dan kekasaran permukaan galas yang dijalankan pada keadaan min...

Full description

Bibliographic Details
Main Author:	Ahmad, Andree
Format:	Thesis
Language:	English
Published:	2014
Subjects:	TJ1-1570 Mechanical engineering and machinery
Online Access:	http://eprints.usm.my/28952/
Abstract	Abstract here

Similar Items

Surface Degradation Analysis Of Roller Bearing
by: Yusof, Nurul Farhana Mohd
Published: (2012)

Effect Of Winding Angle Due To Internal Pressure In Hybrid Polymer-Metal Cylindrical Composite
by: Abdul Rahim, Khairul Izman
Published: (2014)

Effect Of Winding Angle Due To Internal Pressure In Hybrid Polymer-Metal Cylindrical Composite
by: Khairul Izman , Abdul Rahim
Published: (2014)

Active Vibration Control To Attenuate Hand-Arm Vibration For Orbital Sander
by: Ahmad Mazlan, Ahmad Zhafran
Published: (2012)

Investigation of brake squeal/self induced vibrations.
by: Mohammed, Ammar Abdul Majeed Yousif
Published: (2011)

Development Of Low Frequency Electromagnetic Vibration Energy Harvester
by: Hairudin, Wan Masrurah
Published: (2017)

Vibration Analysis Of The Chenderoh Dam Structure Due To The Effects Of Water Spilling And Surging
by: Ghazali, Mohamad Hazwan Mohd
Published: (2019)

Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing
by: Yaacob, Zaihar
Published: (2005)

Development Of Low Voltage Management Circuit For Low Frequency Vibration Energy Harvesting
by: Alisah, Mohamad Izudin
Published: (2016)

Study of wear mechanism in the contact between table liner and roller of vertical roller mills
by: Kamal, Ariffin
Published: (2011)

Active Vibration Control Of Piezo Stack Actuator With Consideration To Hysteresis And Saturation Effects
by: Mazlan , Ahmad Ahmad Zhafran
Published: (2016)

The Influence Of Surface Roughness In Micro Indentation
by: Chuah, Hun Guan
Published: (2013)

Development Of Low Voltage Management Circuit For Low Frequency Vibration Energy Harvesting
by: Alisah, Mohamad Izudin
Published: (2016)

Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner By Mukridz Bin Md Mohtar Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner
by: Mohtar, Mukridz Md
Published: (2012)

Performance & Emission Characteristic Of Emulsified Biofuel Application In Diesel Engine
by: Hamid, Mohd Fadzli
Published: (2017)

An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
by: Jamaludin, Amirul Aliff
Published: (2015)

Attenuation Of Electromagnetic Acoustic Noise From A Variable Speed Induction Motor By Using Dynamic Vibration Absorber
by: V.Radha, Vigren
Published: (2016)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
by: Haghighi, Hamidreza Shahabi
Published: (2008)

Experimental Studies Of Spray And Combustion Characteristics Of Biomass Derived Fuels In A Constant Volume Combustion Chamber
by: Soid, Shahril Nizam Mohamed
Published: (2013)

Testing, Analysis And Efficiency Optimization Of A Small Electric Motorcycle
by: Khalil, Ahmad Syazli Mohd
Published: (2012)

Development Of Decision Model For Maintenance Analysis Of Non-Repairable Component By Considering The External Factor
by: Ahmad, Rosmaini
Published: (2007)

Detection And Classification Of Impact-Induced Delamination In Fiberglass Pre-Impregnated Laminated Composites From Ultrasonic A-Scan Signal Using Artificial Intelligence
by: Mahmod, Muhammad Faisal
Published: (2018)

Experimental And Computational Study Of Flow Over A Rotating Cylinder With Surface Roughnes
by: SEMAN, MOHAMAD TARMIZI ABU
Published: (2016)

Effect Of Tool Geometry And Nose Profile Micro-Deviation On Surface Roughness In Finish Turning
by: Sung , Aun Naa
Published: (2015)

Constraint Estimation Schemes For Semi-Elliptical Surface Cracks Under Tensile And Bending Loads
by: Latiff, Rizman Hariz Abdul
Published: (2017)

Modelling And Stress Analysis Of Lumbar Spine
by: Zulkifli, Siti Syazni
Published: (2015)

Design And Analysis Of Cold Forged AUV Propeller
by: Bakar, Muhamad Husaini Abu
Published: (2011)

Thermal Performance Analysis And Characterization For Mobile Radio
by: Chee, Jiunn Shyong
Published: (2013)

Thermal Performance Analysis And Characterization For Mobile Radio
by: Chee, Jiunn Shyong
Published: (2013)

Relative shaft displacement and vibration measurements for the early fault detection in rolling element bearing
by: Leo, Sing Lim.
Published: (2004)

Development And Analysis Of Linear Resonant Scanner With Torsional Mechanism
by: Koay, Loke Kean
Published: (2013)

Development And Analysis Of Linear Resonant Scanner With Torsional Mechanism
by: Koay, Loke Kean
Published: (2013)

Thermal And Flow Analysis Of Piezoelectric Fans For Cooling LEDS Packages
by: Shaker , Sufian Farid
Published: (2014)

The Finite Element Stress Analysis Of Oblique Pressure Vessel Nozzles
by: Yau , Yat Huang
Published: (1995)

Analysis Of Vibro-Acoustic Effect Of Micro-Perforated Panel Sound Absorber
by: Tan, Wei Hong
Published: (2013)

Methodologies For Thermal Analysis In Single Die And Stacked Dies Electronic Packaging
by: Law, Ruen Ching
Published: (2012)

Study On The Accuracy Of Squeeze Film Damping Calculation With Finite Element Analysis
by: Harun, Muhammad Syakir
Published: (2013)

Speech Quality Analysis For Two-Ways Radio Subjected To Wind Induced Noise
by: Hashim, Mohd Khairul Rabani
Published: (2015)

Analysis Of The Effect Of Roundness On Drum Brake Squeal Using The Finite Element Method
by: Yusuf, Zainal Nazri Mohd
Published: (2009)

Finite Element Analysis Of Composite Ballistics Helmet Subjected To High Velocity Impact.
by: Othman, Rozaini
Published: (2009)