Air Fuel Mixing Modeling For Direct And Transfer Port Injection In Two Stroke Engine

Two-stroke engines are commonly found in small transportation units in many South Asian countries. Due to high fuel losses during the scavenging process, the amount of pollution emitted by these two-stroke vehicles is significant. In this study, the details of a gaseous fuel direct injection system...

Description complète

Détails bibliographiques
Auteur principal:	Tan, Yee Hern
Format:	Thèse
Langue:	anglais
Publié:	2013
Sujets:	TJ1-1570 Mechanical engineering and machinery
Accès en ligne:	http://eprints.usm.my/43979/
Abstract	Abstract here

Documents similaires

Design And Performance Analysis Of A Small Two-Stroke Direct Injection Diesel Engine.
par: Loh, Jian Haur
Publié: (2011)

Port Injection Of Biomass Producer Gas From Downdraft Gasifier In A Diesel Engine
par: Hassan, Suhaimi
Publié: (2011)

Development of a direct fuel injector for a two-stroke gasoline engine
par: Mohd Ali, Mas Fawzi
Publié: (2007)

The influence of rice bran oil blended and intake air temperature on combustion behaviours and knocking of single cylinder four stroke direct injection compression ignition engine
par: Norhafana, Mohamed
Publié: (2024)

Optimization Of Injection Moulding Process For Hdpe Moulded Gear
par: Kassim, Mohd Syahir Mohd
Publié: (2015)

Development Of Variable Valve Timing Mechanism For Compressed Air Engine
par: Ahmad, Fathul Hazrimy
Publié: (2019)

Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
par: Mehat, Nik Mizamzul
Publié: (2010)

Two Stroke Swivel Motion Engine Simulation Using Lotus Engine Software
par: Amir, Alifh Omar
Publié: (2016)

An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
par: Jamaludin, Amirul Aliff
Publié: (2015)

An Integration Of Taguchi Method And Grey Relational Analysis In Optimizing Injection Moulding Processing Parameter Of Recycled Plastic
par: Zakarria, Noor Syuhadah
Publié: (2014)

Effect Of Water Injection Inside A Double Walled Throatless Downdraft Gasifier For Improving Producer Gas Quality
par: Amat Sazali , Shazrul Nizam
Publié: (2015)

Feasibility Study Of Reprocessed Acrylonitrile Butadiene Styrene (ABS) And Optimization Of Injection Moulding Parameters Via Taguchi Method
par: Ng, Chin Fei
Publié: (2011)

The effects of spray atomization by using blended alumina oxide, titanium oxide, and cerium oxide nano particles with diesel fuel in direct injection engine
par: Ali Mohammed Omar Salem, Ba Saleem
Publié: (2023)

Analysis of additives for bio-based engine oil for a two stroke marine engine / Keong Le-Onn
par: Keong, Le-Onn
Publié: (2021)

Influence Of Low Concentration Diamond-Water Nanofluid On Heat Transfer In Loop Heat Pipe
par: Tan, Siew Aun
Publié: (2018)

Performance Of An Alumina Ball Packed Bed Porous Media Burner Fueled By Producer Gas
par: Ho, John Chung Eng
Publié: (2012)

Numerical Investigation Of Heat And Mass Transfer In Porous Medium Fixed With Various Geometries
par: Magami, Irfan Anjum Badruddin
Publié: (2006)

Mathematical Model Of Energy Transferred In A Single Ball Motion In Agitation Mode
par: Budin, Salina
Publié: (2010)

Experimental Studies Of Spray And Combustion Characteristics Of Biomass Derived Fuels In A Constant Volume Combustion Chamber
par: Soid, Shahril Nizam Mohamed
Publié: (2013)

A study of the heat transfer in hydrogen fueled internal combustion engine
par: Khalaf Ibrahim, Hamada
Publié: (2012)

Determination Of Frequency Dependent Global Dynamic Properties Of Engine Mount
par: OOI , LU EAN
Publié: (2004)

Determination Of Frequency Dependent Global Dynamic Properties Of Engine Mount
par: Ooi, Lu Ean
Publié: (2014)

Performance & Emission Characteristic Of Emulsified Biofuel Application In Diesel Engine
par: Hamid, Mohd Fadzli
Publié: (2017)

Speech Quality Analysis For Two-Ways Radio Subjected To Wind Induced Noise
par: Hashim, Mohd Khairul Rabani
Publié: (2015)

Numerical And Experimental Study On A Continuous Single Bubble Rising Behavior With And Without Heat Transfer Effect
par: Ismail, Nazmi Che
Publié: (2014)

CFD investigation on hydrogen enrichment effect to dual-fuel direct injection diesel engine
par: K Frhan, Nhad
Publié: (2021)

Simulation And Experimental Studies Of Intake And Exhaust Tuning For Automotive Engine Low-End Torque Enhancement
par: Khoo, Aik Soon
Publié: (2014)

Simulation And Experimental Studies Of Intake And Exhaust Tuning For Automotive Engine Low-End Torque Enhancement
par: Khoo, Aik Soon
Publié: (2014)

Design And Verification Of An Oscillating Wear Tester To Stimulate The Piston-Cylinder Tribology In Internal Combustion Engines
par: Al-Tmeemi, Bhaa Alden Hussein Ali
Publié: (2011)

Fuel injection parameters study for low exhaust emissions of a common-rail diesel engine fueled with different biodisesels' blend / How Heoy Geok
par: How , Heoy Geok
Publié: (2018)

Comparison of spray characteristics and engine performance of palm oil biodiesel fuel blends in direct injection diesel engine
par: Muhammad Qadri Rusli
Publié: (2025)

Heat Transfer And Deformation Of Flexible Printed Circuit Board With Multi Ball Grid Array Packages
par: Lim, Chong Hooi
Publié: (2017)

Simulation On Atkinson-Miller Cycle Engine Of Four Stroke Two-Wheel Vehicle For Light Operating Condition
par: Subramonian, Sobana Raj
Publié: (2015)

Tribology, performance and emissions of a two stroke-cycle engine using bio-based lubricant / Muhammad Zulfattah Zakaria
par: Muhammad Zulfattah , Zakaria
Publié: (2021)

Small engine load estimator for fuel injection system using two-stage neural network
par: Mohd. Taufiq Muslim
Publié: (2025)

Modelling and calibration of high-pressure direct injection compressed natural gas engine
par: Mohd Fadzil, Abdul Rahim
Publié: (2021)

Effect Of Supercharging And Turbocharging In A Multi Cylinder Low Speed Spark Ignition Engine Fuelled By Producer Gas
par: Mohd Shafie, Mohd Saiful Aizat
Publié: (2015)

Development Of Reverse Engineering System For Generating 3d Cad Body From 2d Image_875008757
par: Abdulqawi, Nur Ilham Aminullah
Publié: (2017)

Kesan Penambahan Air Dalam Reaktor Haba Bermangkin Bagi Penyingkiran Tar Gas Pengeluar
par: Dahlani, Warsita
Publié: (2016)

Synthesis of Electroless Ni-P-Cg (graphite)-SiC Composite Coating on Piston Rings of a Small Two Stroke Utility Engine
par: Bahaaideen, Farhad Bilal
Publié: (2011)