Study Of Processing Parameters In Manufacturing Of Flat Glass-Epoxy Composite Laminates Using Vacuum Bagging Oven Curing

The effective manufacturing process for aircraft structural parts made from composite laminate usually involved autoclave prepreg material manufactured via vacuum bagging pre-forming and autoclave. Though, autoclave involves high capital, running cost and extortionate residual stress. Vacuum bagging...

Full description

Bibliographic Details
Main Author:	Hanafiah, Nur Hafzareen Md
Format:	Thesis
Language:	English
Published:	2013
Subjects:	TJ1-1570 Mechanical engineering and machinery
Online Access:	http://eprints.usm.my/46450/
Abstract	Abstract here

Similar Items

Effect of the bagging configuration on the properties of vacuum-bagging-only (VBO) - Oven cured in complex-shaped composites
by: Hassan, Muhammad Hafiz
Published: (2014)

Effect Of The Bagging Configuration On The Properties Of Vacuum-Bagging-Only (Vbo) - Oven Cured In Complex-Shaped Composites
by: Hassan, Muhmimad Hafiz
Published: (2014)

Effects of curing angle on laminated unsaturated polyster epoxy composites structures
by: Tan, Teng Teng
Published: (2015)

Effect Of Microwave Curing On Laminate Composites Performance
by: Mat, Irwan
Published: (2017)

Analysis of warpage and springback of thick unidirectional carbon-epoxy laminates cured using autoclave
by: Muhammad Mushab Zakaria
Published: (2024)

Properties Of Glass Fibre Epoxy Laminated Composites With Electrospray Of Different Carbon Nanotubes Concentrations
by: Roslan, Putri Nur Salsabila
Published: (2020)

Optimization of parameters for machining hybrid carbon/ epoxy and aluminum 2024 composite laminates
by: Mohamad, Nurhaniza
Published: (2016)

High Velocity Impact Analysis Of Glass Epoxy-Laminated Plates
by: Hameed Sultan, Mohamed Thariq
Published: (2007)

Parametric Studies Of Vbo-Oven Cure Process On The Bonding Quality Of Sandwich Panel.
by: Shamsudin, Nor Fadilah
Published: (2015)

Parametric Studies of Vbo-Oven Cure Process On The Bonding Quality Of Sandwich Panel
by: Shamsudin, Nor Fadilah
Published: (2015)

Fabrication And Properties Of Multiwalled Carbon Nanotubes Filled Woven Glass Fibre Reinforced Epoxy Laminated Hybrid Composites
by: Ahmad, Wan Dalina Wan
Published: (2017)

Hole Integrity Of Carbon Fiber Reinforced Epoxy Composites Using Combined Punching And Drilling Techniques
by: Abdullah, Mohd Safie
Published: (2019)

Characterization of carbon nanotube epoxy composites and carbon nanotubes/laminated carbon fibre epoxy composites
by: Mohd Tamyis, Najihah
Published: (2019)

Ballistic Impact Performance Of Wet Lamination Kega
by: Husain, Husri
Published: (2016)

Properties Enhancement Effect Of The Electrosprayed Carbon Nanotube Coating On Glass Fibre Epoxy Laminated
by: Khairuddin, Nur Aishahatul Syafiqa Mohammad
Published: (2019)

Investigation Of Water Flow Over Contracted Rectangular Flat-Crested Slit Weir In Open Channel
by: Jaafar , Rosley
Published: (2009)

Determination Of Porosity Level Of Out Of Autoclave Carbon Epoxy Advanced Composites Using Ultrasonic C-Scan Pulse-Echo Method
by: Zainal Abidin, Mohd Fadzlee
Published: (2017)

Crushing Behaviour of Woven Roving Glass Fibre/Epoxy Laminated Composite Rectangular Tubes Subjected to 'Quasi-Static Compressive Load
by: Abu Khadra, Fayiz Y. M.
Published: (2002)

Detection And Classification Of Impact-Induced Delamination In Fiberglass Pre-Impregnated Laminated Composites From Ultrasonic A-Scan Signal Using Artificial Intelligence
by: Mahmod, Muhammad Faisal
Published: (2018)

Optimization of cutting parameters for drilling carbon-epoxy fabrics laminates with different fiber orientations
by: Nor Farah Huda bt Abd Halim
Published: (2024)

Investigation of machining parameters on abrasive water jet machined surface of glass/epoxy composites using Taguchi method
by: Mohd Azmir Mohd Azhari
Published: (2024)

The Effect Of Reinforced-Epoxy Coating On The Bending Modulus Of Micro-Cantilever Using Phase-Shift Shadow Moiré.
by: Lim, Jiunn Hsuh
Published: (2012)

Characterisation of heat and mass transfer in the rectangular flat-sheet polyvinylidene flouride membrane for vacuum membrane distillation
by: Chiam, Chel Ken
Published: (2014)

Assessment of kenaf as material for laminated woven kenaf/carbon fibre epoxy hybrid composites
by: Alias, Aisyah Humaira
Published: (2019)

New Hybrid Kenaf Fibre/Epoxy Reinforced Aluminium Laminate Composite For Structural Application
by: Osman, Edynoor
Published: (2019)

Compressive properties of nanosilica filled epoxy polymers and hybrid fibres composite laminates / Norhafiza Muhammad
by: Muhammad, Norhafiza
Published: (2015)

Crushing Behavior of Woven Roving Glass-Epoxy Elliptical Composite Cones
by: Al-Kateb, Mohamed M.
Published: (2004)

Investigation of mechanical performance of woven kenaf/glass hybrid composite metal laminate
by: Subramaniam, Kathiravan
Published: (2021)

Development and fabrication on the oil palm fiber/ glass reinforced in aluminium composite laminates
by: Sia, Charlie Chin Voon
Published: (2009)

Validation of low velocity impact on a biocomposite flat plate laminates
by: Mohd Jamal, Qistina
Published: (2016)

Numerical Investigation On The Effects Of Geometrical Parameters On Film Cooling Performance
by: Ali, Amir Hussein
Published: (2013)

Kajian parameter sistem alatan pengisar menggunakan konsep goncangan.
by: Priyanto, Sugeng
Published: (2011)

Finite element analysis of cohesive element for glass epoxy composite fuselage model
by: Ng, Wei Sim
Published: (2011)

Ensile properties of kenaf/glass hybrid composite laminates reinforced with nanosilica / Norhashidah Manap
by: Manap, Norhashidah
Published: (2016)

Mechanical charaterization of S-glass and E-glass reinforced epoxy composite elbow pipe joints submerged in sea water
by: Bobba, Sujith
Published: (2019)

Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
by: Mehat, Nik Mizamzul
Published: (2010)

A Framework For Deployment Of Process Improvement For Manufacturing Industry
by: Loh , Chee Keong
Published: (2011)

An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
by: Jamaludin, Amirul Aliff
Published: (2015)

An Integration Of Taguchi Method And Grey Relational Analysis In Optimizing Injection Moulding Processing Parameter Of Recycled Plastic
by: Zakarria, Noor Syuhadah
Published: (2014)

Low Velocity Impact Response of Laminated Textile Coiraramids Epoxy Hybrid Composites Subjected to Transverse Penetration Loading
by: Abdul Rashid, Azrin Hani
Published: (2015)