Effect Of Magnesium And Tin As Sintering Additives On Microstructure And Compressive Properties Of Porous Aluminum

The main objective of this research was to improve the compressive properties of porous aluminum by addition of sintering additives; magnesium (Mg) and tin (Sn). Addition of Mg with Sn enhance sintering response of porous Al via liquid phase mechanism. Porous Al were fabricated by powder metallurgy...

Full description

Bibliographic Details
Main Author:	Ahmad Hamdi, Amirah
Format:	Thesis
Language:	English
Published:	2018
Subjects:	T Technology TA401-492 Materials of engineering and construction. Mechanics of materials
Online Access:	http://eprints.usm.my/46667/
Abstract	Abstract here

Similar Items

The effect of sintering temperature on potassium feldspar addition into claytan porcelain
by: Mohd, Norhayati
Published: (2015)

The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips
by: Samsi, Mohd Arif
Published: (2017)

Effect of rice husk silica reinforcement on recycled aa7075 aluminum chip matrix composite properties
by: Mohd Joharudin, Nurul Farahin
Published: (2020)

Effect of indium addition on microstructure, wettability, shear strength and creep behavior of sn100c solder
by: Abdullah, Nabihah
Published: (2019)

Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder
by: Abdullah, Nabihah
Published: (2019)

Effect of quenching and post heat-treatment process to the microstructure and physical properties of electro-carb
by: Sow, Chan On
Published: (2023)

Effect Of Zn Addition On Microstructure, Intermetallic Compound Formation And Mechanical Properties Of Sn-0.7cu Solder On Cu Substrate
by: Ghani, Fitriah Abdul
Published: (2018)

Effect Of Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Low Carbon Steel Using Martensite Starting Microstructure
by: Ahmad, Muhammad Syafiq
Published: (2020)

Mechanical And Biodegradable Properties Of Hydroxyapatite Coated Magnesium Deposited By Cold Spray
by: Razi, Hasniyati Md
Published: (2016)

Effect Of Annealing On Microstructure And Mechanical Properties Of 0.06% Carbon Steel
by: Phoumiphon, Nordala
Published: (2017)

Sputter deposition and characterization of metal sandwiched indium tin oxide/silicon for solar cell application
by: Kabiru Isiyaku, Aliyu
Published: (2020)

Cold compression in direct recycling of aluminium 6061
by: Chan, Boon Loong
Published: (2016)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb].
by: Altayef Al-Jubouri, Ali Abadi
Published: (2006)

Synthesis and characterisation of nitrogen and magnesium-doped with titanium dioxide using sol-gel method
by: Razali, Nur’ Aliaa
Published: (2018)

Effect Of Aging Time, Calcination And Sintering Temperature To Β-Tricalcium Phosphate (Β-Tcp)
by: Redin, Hanna Bakar
Published: (2019)

The Effect Of Pre - Treatment Followed By Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Al 5052 Alloy
by: Norazman, Muhammad Anas
Published: (2017)

Microstructure Analysis, Mechanical Properties And Corrosion Behaviour Of Cryorolled Aluminium 1100 Alloy With Different Heat Treatment
by: Zakaria, Siti Aminah
Published: (2018)

Fabrication Of Porous Cordierite By Gelcasting Method
by: Mokhtar, Ahmad Kamil Fakhruddin Mohd
Published: (2017)

Utilization of palm oil fuel ash in interlocking compressed earth brick
by: Yvonne William Tonduba
Published: (2023)

The effects of silica (SiO2) derived from rice husk composition and sintering temperature on the fabrication of silica (SiO2) and silica-nickel oxide (SiO2-NiO) porous bodies
by: Abdul Rahim, Putri Syalabiah
Published: (2021)

Effect Of Magnesium-Silicon Substitution On The Characteristics Of Carbonated Hydroxyapatite For Synthetic Bone
by: Zainudin, Harmiza
Published: (2018)

Fabrication And Characterization Of Electrochemically Formed Nanocrystalline Porous Si And Gaas [TA418.9.N35 B152 2008 f rb].
by: Ali Al-Obaidi, Nihad Khalaf
Published: (2008)

Investigation Of Potential Weathered Ree-Bearing Granitoid Crust From Dinding District Of Western Tin Belt, Peninsular Malaysia
by: Yaraghi, Ali
Published: (2020)

Development Of High Performance Porcelain And Alumina Foam Structure For Porous Medium Burner
by: Jamaludin, Abdul Rashid
Published: (2016)

Bimodal Porous Ceramic Membrane Via Nanosized Polystryene Templating : Synthesis, Characterization And Performance Evaluation [TA455.C43 L576 2008 f rb].
by: Leo, Choe Peng
Published: (2008)

Assessing low thermal conductivity of bricks which contain rice husk, corn cob and waste tea as an additive material
by: Mat Saman, Nor Sarwani
Published: (2017)

Development Of Porous Ceramic Clay Bodies Using Four Different Types Of Bioresource Wastes
by: Keokangdong, Sengphet
Published: (2014)

Preparation And Characterization Of Porous Chitosan Membrane Soaked In Ammonium Acetate Electrolyte For Proton Batteries
by: Alias, Siti Salwa
Published: (2016)

Effect Of Indium On Microstructure And Intermetallic Compound Formation During Isothermal Aging Of Sncu Solder Alloy
by: Khusaini, Nur Nadirah Mohd
Published: (2018)

The Potential Of Alkanolamide As A New Additive In Natural And Synthetic Rubber Compounds
by: Surya, Indra
Published: (2016)

Effect Of Additives On Zinc Silicon Carbide Composite Coating On Mild Steel By Electrodeposition
by: Aldhire, Tarek Mokhtar Abubaker
Published: (2019)

Fabrication Of 3d Porous Beta Tricalcium Phosphate Bone Scaffold Coated By Oly(Vinyl Alcohol) And Poly(Lactic Acid)_
by: Wong, Wai Yee
Published: (2017)

Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
by: Syukron, Muhammad
Published: (2016)

Formation Of Tio2 Nanotubular Structure In Fluorinated Ethylene Glycol Electrolytes Containing Additives By Anodisation
by: Taib, Mustaffa Ali Azhar
Published: (2018)

Effect Of Ca Addition On Piezoelectric And Dielectric Properties In b0.93la0.02sr0.05(Zr0.52ti0.48)O3 (Plszt) System
by: Rashid, Tuan Nur Izzah Tuan Ab
Published: (2018)

Selective laser sintering of polymer nanocomposites
by: Wahab, Md Saidin
Published: (2008)

Effect Of Li2co3 Addition On The Piezoelectric And Dielectric Properties Of Pb0.93la0.02sr0.05(Zr0.52ti0.48)O3 Ceramics
by: Siddiqui, Maliha
Published: (2016)

Engineering properties and microstructure of brickwork under aggressive environment
by: Wan Ibrahim, Mohd Haziman
Published: (2011)

Optically Pumped Lasing Properties Of ZnO Nanorods
by: Nordin, Muhammad Nuri
Published: (2018)

Mechanical properties of ceramic tiles by replacement of quartz by RHA and POFA
by: Jamo, Hassan Usman
Published: (2015)