Chlorination Of Nitrided Malaysian Ilmenite Concentrate Reduced With Polypropylene And Coal

The production of Titanium Oxycarbonitride (TiOxCyNz) from Malaysian ilmenite and its chlorination at low temperatures for production of Titanium Tetrachloride (TiCl4) was studied in this project. The objective was to improve an alternative technology for production of TiCl4. The effects of carbothe...

書誌詳細
第一著者:	Ibrahim, Najwa
フォーマット:	学位論文
言語:	英語
出版事項:	2019
主題:	T Technology TA401-492 Materials of engineering and construction. Mechanics of materials
オンライン･アクセス:	http://eprints.usm.my/46737/
Abstract	Abstract here

類似資料

Utilization of coal bottom ash and fine coconut shell as partial sand replacement in concrete
著者:: Mazenan, Puteri Natasya
出版事項: (2019)

Friction and wear behavior of aluminium chromium nitride coating and palm oil methyl ester lubrication
著者:: Sebastian Dayou
出版事項: (2013)

Strength and water permeability of concrete containing coal bottom ash as cement and fine aggregate replacement material
著者:: Basirun, Nurul Fasihah
出版事項: (2019)

Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content
著者:: Ismail, Sushilawati
出版事項: (2014)

Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment
著者:: Ali, Sajjad
出版事項: (2019)

Properties and performance of high strength fibre reinforced concrete by using steel and polypropylene fibres
著者:: Wan Jusoh, Wan Amizah
出版事項: (2019)

Self compacting concrete containing polypropylene fibre and its behaviour as wall panel under cyclic load
著者:: Khalaf Al-Alwani, Anas Qasim
出版事項: (2018)

The Velocity Impact Response Of Filled And Unfilled Polypropylene Honeycomb Core Sandwich Structure
著者:: Ahmad, Mohamad Ibrahim
出版事項: (2016)

The effect of injection molding processing conditions and fiber content towards the properties of polypropylene-nanoclay nanocomposites blend with gigantochloa scortechinii fibers
著者:: Khamis, Siti Zubaidah
出版事項: (2017)

Rheological Behavior Of Talc And Calcium Carbonate Filled Polypropylene Hybrid Composites [TA455.P58 S528 2008 f rb].
著者:: Samsudin, Mohd Shamsul Farid
出版事項: (2008)

Preparation, Characterization, Properties And Degradation Behaviour Of Peanut Shell Powder Recycled Polypropylene Composites
著者:: Zaaba, Nor Fasihah
出版事項: (2017)

Properties Of Glass Fibre Epoxy Laminated Composites With Electrospray Of Different Carbon Nanotubes Concentrations
著者:: Roslan, Putri Nur Salsabila
出版事項: (2020)

Influence Of Acidic Calcium Phosphate Solution Concentration On The Properties Of Dicalcium Phosphate Dihydrate Coated On Β-Tricalcium Phosphate Pellets
著者:: Abidin, Nurul Zawani Zainal
出版事項: (2019)

Development Of Transport Phenomena Mathematical Models For Linear And Concentric Microdialysis Probes With Diffusion Limited And Convection Enhanced Operational Features
著者:: Kho, Chun Min
出版事項: (2018)

Effects of kenaf/polyester blending ratios on physical and mechanical properties of yarns produced from ring spinning system
著者:: Mohd Rusli, Najwa Wajihah
出版事項: (2019)

Synthesis and characterization of polyaniline/magnetite nanocomposites for fabrication of nanofiber textile
著者:: Ibrahim Takai, Zakiyyu
出版事項: (2019)

Water permeability of foamed concrete
著者:: Wan Ibrahim, Mohd Haziman
出版事項: (2004)

The effect of different concentration of composite coagulant on different arrangement of electrodes for hybrid composite coagulation and lector coagulation treatment of landfill leachate
著者:: Mohd Amdan, Nur Syahirah
出版事項: (2021)

Preparation And Properties Of Intrinsic Self-Healing Natural Rubber
著者:: Thajudin, Nuur Laila Najwa
出版事項: (2021)

Performance of recycled polymeric fiber as reinforcement in bituminous mixture for road maintenance works
著者:: Usman, Nura
出版事項: (2019)

Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process
著者:: Rady, Mohammed Hussien
出版事項: (2019)

Polylactic acid/thermoplastic tapioca starch blend incorporated with selected essential oils for active food packaging
著者:: Ajiya, Adamu Dahiru
出版事項: (2019)

Bond strength of corroded high yield steel bars embedded in normal strength concrete
著者:: Thomas Tan
出版事項: (2019)

Sifat fizikal dan keupayaan mekanikal konkrit campuran abu kulit kupang (perna viridis) sebagai bahan tambah
著者:: Ismail, Nurul Nabilah
出版事項: (2019)

Natural frequencies evaluation on existing reinforced concrete bridges using microtremor testing
著者:: Idris, Nurul Shazwin
出版事項: (2019)

Parameter analysis of copper-nickel-tungsten prepared via powder metallurgy process for electrical discharge machining of polycrystalline diamond
著者:: Sabri, Ainaa Mardhiah
出版事項: (2019)

The potentials of pennisetum purpureum ash as cement replacement material
著者:: Nik Pa, Nik Nadia Amira
出版事項: (2019)

Development of eddy current testing instrument on metal testing for non-destructive testing applications
著者:: Elva Alias
出版事項: (2019)

The Effect Of Annealing On Random Lasing In Zinc Oxide Nanorods Grown By Chemical Bath Deposition
著者:: Maad Tazri, Nur 'Izazi
出版事項: (2019)

Engineering properties of ring shaped polytheylene terephthalate (RPET) fiber self-compacting concrete
著者:: Sheikh Khalid, Faisal
出版事項: (2015)

Mechanical properties of ceramic tiles by replacement of quartz by RHA and POFA
著者:: Jamo, Hassan Usman
出版事項: (2015)

Impact resistance of foamed concrete slab and its modifications subjected to hemispherical impactor
著者:: Hadipramana, Josef
出版事項: (2015)

Graphite immobilisation in glass composite materials
著者:: Mayzan, Mohd Zul Hilmi
出版事項: (2015)

Green synthesis, characterization and in-vitro bioactivities of gold nanoparticles mediated by turmeric crude extract and curcumin
著者:: Abbas, Sameera
出版事項: (2021)

Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting
著者:: Ahmed Bhutto, Aqeel
出版事項: (2021)

A new empirical model to predict stress intensity factor for double interacting surface cracks located in hollow cylinder
著者:: Fakhri, Omar Mohammed
出版事項: (2021)

A modified flower pollination algorithm and carnivorous plant algorithm for solving engineering optimization problem
著者:: Ong, Kok Meng
出版事項: (2021)

Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures
著者:: Muda, Rizamarhaiza
出版事項: (2021)

Behavior of concrete-filled pvc tube columns under axial load
著者:: Abdulrazzaq Azeez, Alyaa
出版事項: (2018)

Detection of multiple defects based on structural health monitoring of pipeline using guided waves technique
著者:: Elwalwal, Hatem Mostafa
出版事項: (2018)