High-Strength Interstitial Alloys

During nitriding of Mo powder. surface hardening of the sample due to the formation of b-MoN was observed. The sintered layer of S-MoN reduced the passage of nitrogen to the interior of the sample being completely nitrided and hence prevented it from only a thin layer of Mo powder was therefore com...

وصف كامل

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Othman, Rusli
التنسيق:	أطروحة
اللغة:	الإنجليزية
منشور في:	1986
الموضوعات:	TA401-492 Materials of engineering and construction. Mechanics of materials
الوصول للمادة أونلاين:	http://eprints.usm.my/62179/
Abstract	Abstract here

مواد مشابهة

Bond strength of corroded high yield steel bars embedded in normal strength concrete
حسب: Thomas Tan
منشور في: (2019)

Properties and performance of high strength fibre reinforced concrete by using steel and polypropylene fibres
حسب: Wan Jusoh, Wan Amizah
منشور في: (2019)

Bond behaviour of deformed steel rebars in steel fibre high- strength self-compacting concrete
حسب: Nelly Majain
منشور في: (2022)

High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application
حسب: Harimon, Mohd Azhar
منشور في: (2017)

Synthesis and characterization of nanoparticles of Nico Alloy @Au Core-Shell Structure
حسب: Nguyen, Ngoc Minh
منشور في: (2007)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
حسب: Kamdani, Kamaruddin
منشور في: (2005)

Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process
حسب: Rady, Mohammed Hussien
منشور في: (2019)

A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process
حسب: Yusuf, Nur Kamilah
منشور في: (2013)

Strength and water permeability of concrete containing coal bottom ash as cement and fine aggregate replacement material
حسب: Basirun, Nurul Fasihah
منشور في: (2019)

The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al [TA483. I98 2004 f rb] [Microfiche 7664].
حسب: Ishak, Mohamad Izha
منشور في: (2004)

Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment
حسب: Ali, Sajjad
منشور في: (2019)

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
حسب: Mohd Harun, Dalila
منشور في: (2020)

Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA)
حسب: M El-Aswad, Ashraf Mahmood
منشور في: (2015)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb].
حسب: Altayef Al-Jubouri, Ali Abadi
منشور في: (2006)

Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting
حسب: Ahmed Bhutto, Aqeel
منشور في: (2021)

A study on high performance concrete using sandstone aggregates
حسب: Paramasivam Suresh Kumar
منشور في: (2006)

Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel
حسب: Moh Halmi, Mohamad Ariff
منشور في: (2021)

Mechanical Properties And Bioactivity Of Ti-Nb-Ha Composite Fabricated By Mechanical Alloying
حسب: Ahmad, Farrah Noor
منشور في: (2020)

Properties Of Biocompatible Mg-Zn Alloy Based Hybrid Composite Fabricated By Powder Metallurgy
حسب: Ab Rashid, Nazirah
منشور في: (2020)

Bioactive surface modification of ti-nb alloy by alkaline treatment in potassium hydroxide solution
حسب: Basry, Nur Adila Amira
منشور في: (2020)

Bioactive Surface Modification Of Ti-Nb Alloy By Alkaline Treatment In Potassium Hydroxide Solution
حسب: Basry, Nur Adila Amira
منشور في: (2020)

Effects of kenaf/polyester blending ratios on physical and mechanical properties of yarns produced from ring spinning system
حسب: Mohd Rusli, Najwa Wajihah
منشور في: (2019)

Effect Of Indium On Microstructure And Intermetallic Compound Formation During Isothermal Aging Of Sncu Solder Alloy
حسب: Khusaini, Nur Nadirah Mohd
منشور في: (2018)

The Effect Of Pre - Treatment Followed By Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Al 5052 Alloy
حسب: Norazman, Muhammad Anas
منشور في: (2017)

Microstructure Analysis, Mechanical Properties And Corrosion Behaviour Of Cryorolled Aluminium 1100 Alloy With Different Heat Treatment
حسب: Zakaria, Siti Aminah
منشور في: (2018)

Friction Stir Welding Of Cryorolled Al 5083 Alloy Optimization Of Process Parameters Using Taguchi Technique
حسب: Anuar, Muhammad Firdaus
منشور في: (2019)

Effect of indium addition on microstructure, wettability, shear strength and creep behavior of sn100c solder
حسب: Abdullah, Nabihah
منشور في: (2019)

Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder
حسب: Abdullah, Nabihah
منشور في: (2019)

To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling
حسب: Selamat, Siti Norhana
منشور في: (2020)

A comparative study on wear and corrosion behaviour of tungsten carbide-nickel (Wc-Ni) and tungsten carbide-cobalt (Wc-Co) high velocity oxy-fuel (HVOF) for carbon steel blade
حسب: Ahmad, Noor Aqilah
منشور في: (2017)

Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
حسب: Syukron, Muhammad
منشور في: (2016)

Limit Equilibrium And Finite Element – Shear Strength Reduction Stability Analysis, Kota Bunyih Yailings Dam, Pengkalan Hulu, Perak, Malaysia¬¬
حسب: Agam, Maclive Wilkinson
منشور في: (2018)

Isothermal Aging Of Sn-3.0ag-0.5cu And Sn100c Solder Alloys Processed Via Equal Channel Angular Pressing
حسب: Baser, Muhammad Fadlin Hazim
منشور في: (2020)

Characterisation of deformation behaviour and damage progression of recycled aluminium alloy AA6061
حسب: Ho, Choon Sin
منشور في: (2021)

Development Of High Performance Porcelain And Alumina Foam Structure For Porous Medium Burner
حسب: Jamaludin, Abdul Rashid
منشور في: (2016)

Optimization of silver nanoparticles sizes in ag-cu nanopaste as die-attach materials for high temperature applications
حسب: Noordin, Norasiah Mohammad
منشور في: (2017)

The stiffness and strength degradation of timber concrete composite slab deck under repeated loading
حسب: Yeo, Kevin Jit Tong
منشور في: (2021)

Mechanical And Tribological Properties Of Ultra High Molecular Weight Polyethylene With Zinc Oxide Antibacterial Agent For Joint Implant
حسب: Chang, Boon Peng
منشور في: (2014)

Prediction of springback in the forming of advanced high strength steel: simulation and experimental study
حسب: Mohamad Noor, Noraishah
منشور في: (2011)

Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content
حسب: Ismail, Sushilawati
منشور في: (2014)