Developing a meso-scale non-contact measuring method based on vision system : calibration of CCD camera
In developing a vision based measuring system, the camera’s precision has always been the bottleneck, and often being discussed. The combination of digital camera, narrow angle, relatively big distortions and focus to infinity cause some difficulties in camera calibration, as a result none of the ex...
| Main Author: | A.Rahman, Khairul Anuar |
|---|---|
| Format: | Thesis |
| Language: | English English |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.utem.edu.my/id/eprint/14905/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=92056 |
| Abstract | Abstract here |
Similar Items
Investigation of factors affecting flame stabilization in meso-scale combustor
by: Muazzam Zainudin, Muhammad Ikhwan
Published: (2021)
by: Muazzam Zainudin, Muhammad Ikhwan
Published: (2021)
Investigation of swirl injectors and supersonic nozzles for the development of a meso-scale thrust chamber / Ahmad Hussein Abdul Hamid
by: Abdul Hamid, Ahmad Hussein
Published: (2008)
by: Abdul Hamid, Ahmad Hussein
Published: (2008)
Development of Non-Contact Measurement of Glucose in Urine by
Smartphone-Based Laser Refractometry for Continuous Monitoring of
Diabetes
by: Amirul Badiuzzaman, Sinin, et al.
Published: (2025)
by: Amirul Badiuzzaman, Sinin, et al.
Published: (2025)
Geometric and radiometric performance analysis for CCD and CMOS camera sensor
by: Rosmashaida Mat Lazim
Published: (2025)
by: Rosmashaida Mat Lazim
Published: (2025)
Improvement of vision inspection during tip to tip measurement through parameter optimization
by: Rahman, Muhamad Hakim
Published: (2018)
by: Rahman, Muhamad Hakim
Published: (2018)
Non-Newtonian Fluid Analytical Filling Time Model With Contact Line Jump Underfill Encapsulation
by: Ng, Fei Chong
Published: (2019)
by: Ng, Fei Chong
Published: (2019)
Design, development and calibration of a robotic wrist force sensor
by: Muralindran Mariappan
Published: (2004)
by: Muralindran Mariappan
Published: (2004)
Simulation study on Meso-scale vortex combustor with nozzle
by: Muhammad Anis Firdaus Sobirin
Published: (2025)
by: Muhammad Anis Firdaus Sobirin
Published: (2025)
In Process Roughness Measurement And Tool Nose Radius Wear Assesment In Finish Turning Using Machine Vision
by: Balasundaram, Mohan Kumar
Published: (2017)
by: Balasundaram, Mohan Kumar
Published: (2017)
Camera calibration for unmammed aerial vehicle mapping
by: Ahmad Razali Yusoff
Published: (2025)
by: Ahmad Razali Yusoff
Published: (2025)
Camera calibration of DSLR cameras with different resolutions for close range photogrammetry applications
by: Terence Goh Sing Yuan
Published: (2025)
by: Terence Goh Sing Yuan
Published: (2025)
Moving camera automatic number plate recognition using neural network in android platform
by: Conny Liew
Published: (2019)
by: Conny Liew
Published: (2019)
Study of wear mechanism in the contact between table liner and roller of vertical roller mills
by: Kamal, Ariffin
Published: (2011)
by: Kamal, Ariffin
Published: (2011)
Prediction of meso-scale combustion using different turbulence model
by: Chen, King Sing
Published: (2025)
by: Chen, King Sing
Published: (2025)
Meso-scale combustion for power generation using thermo-electric
by: Muhammad Hafizuddin Azeman
Published: (2025)
by: Muhammad Hafizuddin Azeman
Published: (2025)
Tribological behaviour of copper (II) oxide nanoparticles based lubricant to improve durability of contact surface
by: Maizatul Asnida, Hassan
Published: (2018)
by: Maizatul Asnida, Hassan
Published: (2018)
Pressure gradient and geometrical variation of the abrasive blocks during the polishing process of ceramic tiles with line contact
by: Amiril Sahab, Abdul Sani
Published: (2014)
by: Amiril Sahab, Abdul Sani
Published: (2014)
Experimental and computational thermal analysis of vortex flame in meso-scale combustor
by: Mostafa Khaleghi
Published: (2025)
by: Mostafa Khaleghi
Published: (2025)
Adaptive Trajectory Generation For Vision-Based Robot Using Negotiation Principle For Rehabilitation Applications
by: Rasid, Farah Amirah
Published: (2019)
by: Rasid, Farah Amirah
Published: (2019)
Design and development of an image-guided vision system for robotics palletizing / Mohamad Zaid Mohamad Zaihirain
by: Mohamad Zaid, Mohamad Zaihirain
Published: (2021)
by: Mohamad Zaid, Mohamad Zaihirain
Published: (2021)
Integration Of Machine Vision In Industrial Robot For Automated Composite Panel Punching
by: Mohamed Hanafee, Ameer Mohamed Abdeel Aziz
Published: (2018)
by: Mohamed Hanafee, Ameer Mohamed Abdeel Aziz
Published: (2018)
Investigation of flow patterns and measurement of actual bubble velocity using void fraction profile in a vertical industrial scale two-phase flow channel / Nur Adania Nor Azman
by: Nur Adania, Nor Azman
Published: (2022)
by: Nur Adania, Nor Azman
Published: (2022)
Machine Vision Application For Automatic Defect
Segmentation In Weld Radiographs
by: Soo , Say Leong
Published: (2006)
by: Soo , Say Leong
Published: (2006)
Vision Based Multi Sensor Feedback System For Robot System With Intelligent
by: Syed Mohamad Shazali, Syed Abdul Hamid
Published: (2009)
by: Syed Mohamad Shazali, Syed Abdul Hamid
Published: (2009)
Development Of Position Feedback Sensor Based On Vision
Using Neural Network
by: Yunos, Yushazaziah Mohd
Published: (2009)
by: Yunos, Yushazaziah Mohd
Published: (2009)
Application Of Machine Vision On Solder Joint Inspection
Using Orthogonal And Oblique Views
by: Ong , Teng Yeow
Published: (2010)
by: Ong , Teng Yeow
Published: (2010)
Design of a medium scaled air vehicle flapping type / Abbas Siddiqui Mohammed
by: Abbas Siddiqui, Mohammed
Published: (2018)
by: Abbas Siddiqui, Mohammed
Published: (2018)
A Vision Guided Method Using Omnidirectional Camera
by: Zakaria, Mohd Maarof Mohd
Published: (2016)
by: Zakaria, Mohd Maarof Mohd
Published: (2016)
A three dimensional (3D) vision based defect inspection system for gluing application
by: Harun, Mohamad Haniff
Published: (2013)
by: Harun, Mohamad Haniff
Published: (2013)
Effects of pressure on steam turbine performance in a small scale power plant / Bala Murugan Chandiran
by: Bala Murugan, Chandran
Published: (2018)
by: Bala Murugan, Chandran
Published: (2018)
Heat generation transport in micro and sub- micro scale in electronic packaging
by: Ooi, Chun Keang
Published: (2003)
by: Ooi, Chun Keang
Published: (2003)
Synthesis of meso-substituted porphyrins
by: Muhammad Ainol Naim Mat Adam
Published: (2025)
by: Muhammad Ainol Naim Mat Adam
Published: (2025)
Accuracy assessment of small format aerial photo based on variation camera calibration parameter
by: Chen, Seok Mi
Published: (2025)
by: Chen, Seok Mi
Published: (2025)
Assessment of camera calibration parameters based on digital aerial image of unmanned aerial vehicle
by: Wong, Hang Lung
Published: (2025)
by: Wong, Hang Lung
Published: (2025)
Image acquisition and syatem integration for GIG-E vision camera
by: Lau, Kah Meng
Published: (2025)
by: Lau, Kah Meng
Published: (2025)
Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
by: Haghighi, Hamidreza Shahabi
Published: (2008)
by: Haghighi, Hamidreza Shahabi
Published: (2008)
Detection Of Chipping In Ceramic
Cutting Inserts From Workpiece
Profile Signature During Turning
Process Using Machine Vision
by: Kiow, Lee Woon
Published: (2017)
by: Kiow, Lee Woon
Published: (2017)
AI-driven computer vision for defect detection in contact lenses
by: Nazziwa, Lynnate Jane
Published: (2026)
by: Nazziwa, Lynnate Jane
Published: (2026)
Financing Mechanisms for Small Scale Renewable Energy Projects in Malaysia
by: Indra Khairil, Bahrain
Published: (2011)
by: Indra Khairil, Bahrain
Published: (2011)
Water quality monitoring using lowcost digital camera / Ernieza Suhana Mokhtar
by: Mokhtar, Ernieza Suhana
Published: (2008)
by: Mokhtar, Ernieza Suhana
Published: (2008)
Similar Items
-
Investigation of factors affecting flame stabilization in meso-scale combustor
by: Muazzam Zainudin, Muhammad Ikhwan
Published: (2021) -
Investigation of swirl injectors and supersonic nozzles for the development of a meso-scale thrust chamber / Ahmad Hussein Abdul Hamid
by: Abdul Hamid, Ahmad Hussein
Published: (2008) -
Development of Non-Contact Measurement of Glucose in Urine by
Smartphone-Based Laser Refractometry for Continuous Monitoring of
Diabetes
by: Amirul Badiuzzaman, Sinin, et al.
Published: (2025) -
Geometric and radiometric performance analysis for CCD and CMOS camera sensor
by: Rosmashaida Mat Lazim
Published: (2025) -
Improvement of vision inspection during tip to tip measurement through parameter optimization
by: Rahman, Muhamad Hakim
Published: (2018)
