Mechanical properties of recycling chip aluminium 7075 through powder metallurgy technique

This research has been carried out based on the recycling of 7075 aluminium alloy via powder metallurgy technique. Methods chose in recycling waste material is being concerned as one of the major issues. Recycled materials were obtained from 7075 aluminium alloy machining chips via powder metallurgy...

書目詳細資料
主要作者:	Yacob, Fariza Fuziana
格式:	Thesis
語言:	英语英语
出版:	2015
主題:	T Technology (General) TA Engineering (General). Civil engineering (General)
在線閱讀:	http://eprints.utem.edu.my/id/eprint/16810/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=96006
Abstract	Abstract here

相似書籍

The effects of the reinforcement of alumina and rice husk particles on the hybrid recycled aluminium AA7075 chips composite on physical, mechanical and morphological properties
由: Kamaruddin, Nor Asmalinda
出版: (2022)

Tribological properties of EDC coated layer by using Powder Metallurgy electrode
由: Awang, Sayidah Nafisah
出版: (2024)

Effect of zinc and molybdenum on the microstructure and corrosion behavior of magnesium-based alloys produced by powder metallurgy technique
由: Muhammad Ameerul Fikri, Romzi
出版: (2022)

Effect of rice husk silica reinforcement on recycled aa7075 aluminum chip matrix composite properties
由: Mohd Joharudin, Nurul Farahin
出版: (2020)

Optimization Of Welding Parameters On Mechanical Properties Of Aluminium Alloy 7075
由: Yomli, Sofia Mulyani
出版: (2019)

Direct recycling of aluminium alloy 6061 and 7075 employing cyclic extrusion compression back pressure technique
由: Mohamad Syahmi, Shahrom
出版: (2016)

Characterization Of Oil Retrogression Of Aluminum Alloy 7075
由: Ng, Guan Yao
出版: (2014)

The effect of powder milling of SiC and aluminium powder for powder metallurgy fabrication
由: Koh Feng Choon
出版: (2025)

The Influence Of Tool Geometry Towards Cutting Performance On Aluminium 7075
由: Jumali, Muhammad Syafik
出版: (2016)

Mechanical and tribological properties of recycled carbon fiber reinforced polypropylene composites
由: Abdul Latiff, Anisah
出版: (2017)

The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips
由: Samsi, Mohd Arif
出版: (2017)

Properties Of Biocompatible Mg-Zn Alloy Based Hybrid Composite Fabricated By Powder Metallurgy
由: Ab Rashid, Nazirah
出版: (2020)

Investigation On Physical, Thermal, Mechanical And Morphological Properties Of Kenaf Reinforced Recycled Polypropylene/Polyethylene Composites
由: Jumadi, Muhammad Taufiq
出版: (2019)

Effect of powder metallurgy processing parameters on mechanical properties and dehydrogenation behaviour of titanium-niobium alloy
由: Sa'aidi, Anis Fatehah
出版: (2025)

The effects of glass waste and grog on physical and mechanical properties in porcelain by powder pressing method
由: Aramjat, Abu Bakar
出版: (2014)

A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process
由: Yusuf, Nur Kamilah
出版: (2013)

Development and mechanical evaluation of interlocking block incorporating eggshell powder and recycled concrete aggregate
由: Othman, Nur Syahirah
出版: (2026)

The effect of cooling rate on mechanical and morphological properties of heat treated recycled aluminum alloy from scrap
由: Aziz, Azim
出版: (2013)

Fabrication of porous TiNb alloy incorporated with TiH2 powder by powder metallurgy processing route for implant applications / Siti Mariana Hosnie
由: Hosnie, Siti Mariana
出版: (2018)

Study on surface retrogression and re-aging (SRRA) behaviour of aluminium alloy 7075
由: Nozmi, Nor Azrin
出版: (2013)

The optimization of T6 heat treatment on microstructure and mechanical properties of thixoformed LM4 aluminium alloy
由: Safian, Mohd Azizul Hikmi
出版: (2018)

Properties of concrete containing eggshell powder as partial cement replacement
由: Tan, Yeong Yu
出版: (2018)

The effect of silicon carbide (SiC) on physical and mechanical properties of recycled aluminium chip AA6061
由: Ab Kadir, Muhammad Irfan
出版: (2018)

Investigation On Mechanical Behaviour Of Light Weight Woven Kenaf Fibre Reinforced Polypropylene-Aluminium Fibre Metal Laminate
由: Mohd Zalani, Naziatul Fazilah
出版: (2019)

Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process
由: Rady, Mohammed Hussien
出版: (2019)

Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method
由: WAN FARHANA, MOHAMAD
出版: (2021)

Solder Joint Reliability Of Flip Chip BGA Package
由: Lee, Kor Oon
出版: (2004)

Aerated lightweight concrete using aluminium powder and stone chipping
由: Lim, Che Chien
出版: (2025)

Parameter analysis of copper-nickel-tungsten prepared via powder metallurgy process for electrical discharge machining of polycrystalline diamond
由: Sabri, Ainaa Mardhiah
出版: (2019)

Chemically Modified Graphene Nanoplatelets-Thermoset Adhesive Through Ultrasonication Assisted Mixing For Natural Rubber Aluminium Bonding
由: Mohd Zafri, Mazatul Nadia
出版: (2019)

Effects of new and recycle flux on the mechanical properties of submerged arc welded (SAW) line pipe grade X52M and X65M / Meor Mohd Adli Taib
由: Meor Mohd Adli, Taib
出版: (2020)

Performance Of Recycled Paper Mill Sludge As A Modifier In Sphalt Mixtures Through Dry Process
由: Chew, J-Wei
出版: (2018)

Study of different fillers on aluminium alloys 6061 and 7075 by MIG welding
由: Nur Fakhriah, Mohd Noordin
出版: (2020)

Fabrication of floor tiles from recycled HDPE bottle filled recycled glass composite using hot press method
由: Ramily, Nurlina Aimi
出版: (2018)

Characterisation of deformation behaviour and damage progression of recycled aluminium alloy AA6061
由: Ho, Choon Sin
出版: (2021)

Investigation on microstructure, mechanical and durability characteristics of recycled aggregate concrete with non-traditional supplementary cementitious materials / Mohammed F. E. Alnahhal
由: Mohammed F. E. , Alnahhal
出版: (2017)

Comparison of performance of no-clean and water-soluble fluxes in fine-pitch flip-chip package / Saif Wakeel
由: Saif , Wakeel
出版: (2021)

Accelerated Weathering Of Rubberwood Reinforced Recycled Polypropylene Composites
由: Ademola, Adebayo Babatope
出版: (2019)

Cold compression in direct recycling of aluminium 6061
由: Chan, Boon Loong
出版: (2016)

Evaluation of bio-based metal working fluid on cutting performance and chip formation processes
由: Shahandzir, Baharom
出版: (2025)