Friction improvement of palm kernel activated carbon-epoxy by oil and water impregnation

It has become a whole wide problem that friction and wear causing a huge amount of energy loss. Friction improvement is needed to obtain maximum efficiency and at the same time being environment-friendly by reducing waste. Some study show that 50% of premature bearing failure were due to lubricants...

وصف كامل

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Ibrahim, Maziah
التنسيق:	أطروحة
اللغة:	الإنجليزية الإنجليزية
منشور في:	2019
الموضوعات:	T Technology (General) TJ Mechanical engineering and machinery
الوصول للمادة أونلاين:	http://eprints.utem.edu.my/id/eprint/23954/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=115583
Abstract	Abstract here

مواد مشابهة

Tribological Performances For Palm Kernel Activated Carbon Epoxy Composite
حسب: Mat Tahir, Noor Ayuma
منشور في: (2016)

PROPERTIES ENHANCEMENT OF OIL PALM TRUNK IMPREGNATED WITH EPOXY RESIN
حسب: WAN NUR FATIHAH AMIRAH BINTI NIK WAN @ WAN SENIK
منشور في: (2024)

Frictional Characteristics Of Surface Textured Activated Carbon Composite Derived From Palm Kernel
حسب: Mohmad, Martini
منشور في: (2019)

Friction stir alloying of immiscible magnesium alloy and mild steel with aluminium and carbon nanotubes as additives / Sufian Raja
حسب: Sufian , Raja
منشور في: (2022)

Physical-mechanical properties of palm kernel activated carbon-epoxy (PKAC-E) composite
حسب: Khudhair, Ahmed Qays
منشور في: (2016)

Dry Sliding Investigation Of An Activated Carbon-Epoxy Composite Extracted From Palm Kernel
حسب: Mahmud, Dayang Nor Fatin
منشور في: (2020)

Stick Slip Friction Models Control Design Approach For Friction Compensation In Machine Tools Drive System
حسب: Rafan, Nur Aidawaty
منشور في: (2017)

Investigation of dynamics properties of dissimilar materials produced by friction stir welding
حسب: Siti Norazila, Zahari
منشور في: (2017)

Composite of graphene oxide impregnated palm kernel shell based activated carbon for dye wastewater treatment / Tan Yan Ying
حسب: Tan , Yan Ying
منشور في: (2025)

N-PID controller with feedforward og generalized maxwell-slip and static friction model for for friction compensation in machine tools
حسب: Tsung Heng, Chiew
منشور في: (2014)

Performance of buri palm (corypha utan) reinforced epoxy composite : effect of alkali treatment
حسب: Zalinawati, Muhamad
منشور في: (2021)

Modeling Of Static And Kinetic Friction In Rubber-Pad Forming Process
حسب: Ramezani, Maziar
منشور في: (2009)

Hole Integrity Of Carbon Fiber Reinforced Epoxy Composites Using Combined Punching And Drilling Techniques
حسب: Abdullah, Mohd Safie
منشور في: (2019)

Properties of resin-impregnated sugar palm fibre- reinforced epoxy composites
حسب: Mohd Nor Munawar, Nur Sofeana Zulaika
منشور في: (2018)

Improving corrosion and wear resistance of carbon steel piping system in oil and gas application through thermal spray coating techniques / Mitra Akhtari Zavareh
حسب: Mitra Akhtari, Zavareh
منشور في: (2015)

Heat transfer and friction loss analysis of non-wood fiber suspensions in closed conduit flow / Samira Gharehkhani
حسب: Samira , Gharehkhani
منشور في: (2016)

Study of heat transfer and friction loss of nanofluid suspension flow in square pipe heat exchanger / Jayprasanth Krishnan
حسب: Jayprasanth , Krishnan
منشور في: (2020)

Study of heat transfer and friction loss of nanofluid suspension flow in circular pipe heat exchanger / Sandru Ramadas
حسب: Sandru , Ramadas
منشور في: (2020)

Modeling Of Static And Kinetic Friction In Rubber-Pad Forming Process
حسب: Ramezani, Maziar
منشور في: (2009)

Mechanical and Durability Properties of Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS)
حسب: Yong, Eric Pik Kwong.
منشور في: (2016)

HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated on Coconut Shell-based and Palm Kernel Shell-based Activated Carbon
حسب: Sherra Bellina, Barrabas Kuta
منشور في: (2021)

Heat transfer and friction loss analysis of a novel eco-friendly colloidal suspension in flow passages / Kaviraj Jayaraman
حسب: Kaviraj , Jayaraman
منشور في: (2019)

Study of heat transfer and friction loss analysis of flowing fluid in different configuration of closed conduit flow / Puravi Saminathan
حسب: Puravi, Saminathan
منشور في: (2021)

Synthesis of carbon nanotubes on impregnated powdered activated carbon for removal of cadmium from water
حسب: Saadi, Mohammed A. Abdul Rahman
منشور في: (2024)

Engineering properties of pervious concrete containing palm oil clinker aggregate / Ibrahim Hussein Adebayo
حسب: Ibrahim Hussein, Adebayo
منشور في: (2018)

Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner By Mukridz Bin Md Mohtar Effect Of Electroless Plating On Wear And Surface Friction Of Alsi Cylinder Liner
حسب: Mohtar, Mukridz Md
منشور في: (2012)

Effect of shoulder to pin diameter ratio on mechanical and microstructural properties of friction stir welded magnesium alloy AZ31B
حسب: Nurul Hidayah, Othman
منشور في: (2018)

Fabrication of metal matrix nanocomposite surface on WE43 using friction stir processing for biomedical implant application / Wu Bo
حسب: Wu , Bo
منشور في: (2024)

Synthesis of nanofluid, heat transfer and friction loss of nanofluid in different shaped heat exchanger tubes / Omar Fayez Almatar Abd Rabbuh
حسب: Omar Fayez Almatar , Abd Rabbuh
منشور في: (2019)

Friction stir alloying of AZ61 magnesium alloy and SPHC mild steel with ZN-CNT additive / Muhammad Zulhiqmi Mohd Jamil
حسب: Muhammad Zulhiqmi , Mohd Jamil
منشور في: (2024)

Strengthening mechanisms in friction stir alloying of AZ61 magnesium alloy and mild steel with Cu-CNT additive / Mohammad Ashraf Ariffin
حسب: Mohammad Ashraf , Ariffin
منشور في: (2024)

Friction and wear characteristics of bio-lubricant enhanced with hBN and PKAC additives
حسب: Abdul Rashid, Nur Saidatul Fatimah
منشور في: (2017)

Mechanical properties and fracture behavior of natural fiber-glass fiber reinforced epoxy matrix hybrid composites
حسب: Mawarnie, Ismail
منشور في: (2021)

Determination Of Porosity Level Of Out Of Autoclave Carbon Epoxy Advanced Composites Using Ultrasonic C-Scan Pulse-Echo Method
حسب: Zainal Abidin, Mohd Fadzlee
منشور في: (2017)

Synthesis of nanofluids containing eco-friendly functionalized carbon nanomaterials for improving heat dissipation / Rad Sadri
حسب: Rad, Sadri
منشور في: (2018)

Design of tool and backing/clamping system for dissimilar friction stir welding of high strength AA7075-T6 AND AA2024-T351 aluminum alloys
حسب: Hasan, Mohammed Midhat
منشور في: (2017)

The effects of fusel oil water content reduction on performance and emissions of SI engine with fusel oil – gasoline blended fuel
حسب: Awad, Omar Ibraheem
منشور في: (2018)

Curing profile optimization of silver epoxy die attach in ball grid array package process / Ng Qian Qing
حسب: Ng , Qian Qing
منشور في: (2024)

Recreation of water-cooled exhaust manifold to improve exhaust gas recirculation / Muhammad Irfan Asha'ari
حسب: Muhammad Irfan , Asha'ari
منشور في: (2021)

Effect of palm oil fuel ash (POFA) fineness on the mechanical properties of concrete
حسب: Lau, Jeffrey Yong Lian
منشور في: (2014)