Improvement of vision inspection during tip to tip measurement through parameter optimization

During the running of mass production, yield loss is unavoidable. This can be due to various factors which include but not limited due to the incoming material quality, the machine itself or unnecessary rejection of a product. Unnecessary rejection of a good product often occurs during the vision in...

Full description

Bibliographic Details
Main Author:	Rahman, Muhamad Hakim
Format:	Thesis
Language:	English English
Published:	2018
Subjects:	T Technology (General) TJ Mechanical engineering and machinery
Online Access:	http://eprints.utem.edu.my/id/eprint/23963/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=114814
Abstract	Abstract here

Similar Items

Quantification Of Three-Dimensional Elastic-Plastic Crack-Tip Stress Fields
by: Yusoff, Norwahida
Published: (2018)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
by: Karh Heng, Leong
Published: (2017)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
by: Leong, Karh Heng
Published: (2017)

Application Of Machine Vision On Solder Joint Inspection Using Orthogonal And Oblique Views
by: Ong , Teng Yeow
Published: (2010)

Micro vibration of vacuum cleaner rubber tip
by: Ainol Izzat Mispan
Published: (2025)

A three dimensional (3D) vision based defect inspection system for gluing application
by: Harun, Mohamad Haniff
Published: (2013)

Developing a meso-scale non-contact measuring method based on vision system : calibration of CCD camera
by: A.Rahman, Khairul Anuar
Published: (2014)

Development of portable checking fixture device for automotive quality-confirmation inspection
by: Bastian Wibar, Momang
Published: (2017)

In Process Roughness Measurement And Tool Nose Radius Wear Assesment In Finish Turning Using Machine Vision
by: Balasundaram, Mohan Kumar
Published: (2017)

Hierarchical self organizing map and focusing inspection strategy for mobile robot novelty detection
by: Sha'abani, Mohd Nurul Al-Hafiz
Published: (2014)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
by: Kiow, Lee Woon
Published: (2017)

Optimization of PID parameters for hydraulic positioning system utilizing variable weight Grey-Taguchi and particle swarm optimization
by: Nur Iffah, Mohamed Azmi
Published: (2014)

Association Of Red-Tip Of Pineapple Leaves With Nutrient Deficiency
by: Juva Rajah, Vijiandran
Published: (2007)

Adaptive Trajectory Generation For Vision-Based Robot Using Negotiation Principle For Rehabilitation Applications
by: Rasid, Farah Amirah
Published: (2019)

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision
by: Lee, Woon Kiow
Published: (2017)

Design and development of an image-guided vision system for robotics palletizing / Mohamad Zaid Mohamad Zaihirain
by: Mohamad Zaid, Mohamad Zaihirain
Published: (2021)

Process Parameter Optimization Of Adhesive Dispense Machine
by: Teo, Boon Guan
Published: (2018)

Integration Of Machine Vision In Industrial Robot For Automated Composite Panel Punching
by: Mohamed Hanafee, Ameer Mohamed Abdeel Aziz
Published: (2018)

Study of the tip bending process of Vertically Aligned Carbon Nanotubes
by: Mohd Asyraf Mohd Razib
Published: (2024)

Development of EMG based continuous thumb-tip force model for prostheses design
by: Abdul Rahman
Published: (2024)

Optimizing isotactic polypropylene membrane preparation condition via tips for carbon dioxide and nitrogen separation
by: Wan Zulaisa Amira, Wan Jusoh
Published: (2016)

Finite impulse response optimizers for solving optimization problems
by: Tasiransurini, Ab Rahman
Published: (2019)

Machine Vision Application For Automatic Defect Segmentation In Weld Radiographs
by: Soo , Say Leong
Published: (2006)

Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture
by: Mohd Adnin, Hamidi
Published: (2016)

Pump System Optimization through Pumping System Assessment Tool (PSAT): Case studies in Johor and Sarawak Manufacturing Plants
by: Mohd Danial, Ibrahim, et al.
Published: (2023)

Vision Based Multi Sensor Feedback System For Robot System With Intelligent
by: Syed Mohamad Shazali, Syed Abdul Hamid
Published: (2009)

Development Of Position Feedback Sensor Based On Vision Using Neural Network
by: Yunos, Yushazaziah Mohd
Published: (2009)

Energy efficiency in academic buildings through optimization and operational strategies
by: Albadarneh, Mousa Jamal Salem
Published: (2021)

Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method
by: Md Zain, Mohd Zahiruddin
Published: (2005)

Optimization Of Drilling Parameter For Carbon Fiber Reinforced Polymer CFRP Material Using RSM
by: Abdul Rahim, Mohd Isa
Published: (2019)

Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
by: Mehat, Nik Mizamzul
Published: (2010)

Improving corrosion and wear resistance of carbon steel piping system in oil and gas application through thermal spray coating techniques / Mitra Akhtari Zavareh
by: Mitra Akhtari, Zavareh
Published: (2015)

Process parameters optimization via machine learning and properties characterization of ALSI10MG-316L multi-materials produced using laser powder bed fusion / Miao Huan
by: Miao , Huan
Published: (2024)

Aeroelastic characteristics on deformed high aspect ratio wing with various tip deflections
by: Rosly, Nur Asyikin
Published: (2019)

Kebezaan kefungsian item berkaitan jantina (GDIF) dalam instrumen TIPS II
by: Izazol Idris
Published: (2012)

Development of a prosthetic thumb prototype based on thumb-tip force estimation
by: Jalaludin , Nor Anija
Published: (2024)

Kebezaan kefungsian item berkaitan gender (GDIF) dalam instrumen TIPS II
by: Izazol Idris (P47666)
Published: (2023)

Optimization of cnc turning parameters for minimizing temperature rise in aluminum using a genetic algorithm
by: Mimi Muzlina, Mukri
Published: (2024)

Machining Parameters And Tool Geometry Optimization For Trimming Composite Laminates Using Response Surface Methodology
by: Sundi, Syahrul Azwan
Published: (2021)

Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis
by: Mohd Ali, Noorfa Idayu
Published: (2018)