FEA Analysis Of The Lathe Machining On Machining Characteristics Towards Aluminium Alloy Using RSM Method

This project focuses on the simulation of the turning process by using the finite element analysis (FEA) machining Deform 3D software based on the Box-Behnken of response surface method (RSM) experimental matrix. Based on the Box-Behnken design matrix, there were 13 simulation runs with one centre p...

Full description

Bibliographic Details
Main Author:	Liew, Yoong Ler
Format:	Thesis
Language:	English English
Published:	2020
Online Access:	http://eprints.utem.edu.my/id/eprint/25361/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=119163
Abstract	Abstract here

Similar Items

Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM
by: Mansoor, Mohd Sufriansyah
Published: (2019)

Optimization of cutter geometrical features and machining parameters for Machining Aluminium Silicon Carbide (AlSiC) using RSM
by: Rosman, Muhammad Rafiq
Published: (2024)

Development Of Generative Computer-Aided Process Planning System For Lathe Machining
by: Zubair, Ahmad Faiz
Published: (2019)

Maintenance strategy for old lathe machine in technical vocational education training institution
by: Razni Khalid
Published: (2025)

Optimization of lubrication techniques on machining performance of aluminium alloy 319
by: Zainal Ariffin, Selamat
Published: (2018)

Machinability of aluminium alloy when face milling using carbide inserts
by: Mohd. Zamri Borhan
Published: (2025)

Simulation study of biomechanical properties of porous titanium alloy spinal cage using ct-fea
by: Muhammad Shahruddin, Azmi
Published: (2024)

Effect of different machining parameters on surface roughness of aluminium alloys based on Si & Mg content
by: Abdul Hameed Baloch
Published: (2025)

Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool
by: Khuzaimi, Mohd Aris
Published: (2014)

A study on machining characteristics of strontium modifies LM-6 alloy
by: Hajjaj, Sami Salama
Published: (2024)

Evaluation of Electrical Discharge Machining parameters on energy saving and machining characteristic enhancement of biodegradable AZ31 Magnesium Alloy
by: Norizwan Juraimi
Published: (2024)

Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method
by: Jaafar, Noor Azam
Published: (2013)

Machining performance of 22MnB5 Boron steel cutting tool with Al 6061 Aluminium Alloy
by: Mohd Rashid, Mohd Fairuz
Published: (2021)

Electric discharge machining characteristics of hardened tool steel using aluminium, copper and copper electroplated aluminium electrodes / Thilaga Vaani Nagalingam.
by: Nagalingam, Thilaga Vaani
Published: (2005)

Evaluation of tool wear and machined surface integrity when drilling aluminium alloy 7075 under cold air and dry conditions
by: Nur Munirah Meera Mydin
Published: (2024)

Effects of online workpiece preheating on the machinability of hardened steel AISI H13 during end milling and development of prediction models using RSM
by: Abdullah Mohammad Khalid Hafiz
Published: (2024)

Electrical Discharge Machining of Beryllium Copper Alloys Using Graphite Electrode
by: Mohamed Yusof, Shaik Mohamed
Published: (2009)

FEA of SFRC three ribbed wall panel / Azrul Md Din
by: Md Din, Azrul
Published: (2014)

The performance of tool holder clamping technique in conventional lathe with passive damping system
by: Gwee, Chiou Chin
Published: (2013)

Machining characteristics of oil palm wood treated with phenol formaldehyde resin using compress method
by: Chong, Yi Way
Published: (2011)

Surface analysis and biocompatibility of titanium alloy after wire electro-discharge machining (WEDM) / Nornisaadila Musa
by: Musa, Nornisaadila
Published: (2020)

Finite Element Simulation Of Aluminium Silicon Carbide Metal Matrix Composite Machining
by: Ahmad Adli, Muhammad Akmal
Published: (2020)

Analysis and design of single span military bridge using aluminium alloy
by: Azrul Affandhi Musthaffa Al Bakri
Published: (2025)

Machinability assessment and enhancement of aerospace alloys through workpiece preheating in end milling
by: Hossain, Mohammad Istiyaq
Published: (2024)

Adaptive medium access control protocol of Wifi-Halow for home machine-to-machine network
by: Liew, Jiun Terng
Published: (2019)

Design and development of high flexion total knee replacement (TKR) using finite element analysis (FEA) / Iffa Mohd Arrif
by: Mohd Arrif, Iffa
Published: (2024)

Corrosion characteristics of aluminium alloys in calophyllum inophyllum biodiesel / Raja Nurul Hani Raja Azhar
by: Raja Nurul Hani, Raja Azhar
Published: (2017)

Surface modification of aluminium-zinc alloy (AA7075) and its corrosion characteristics / Angel Richard
by: Angel , Richard
Published: (2018)

Optimisation of electrical discharge machining for oxidation-free metallic nanoparticle synthesis of titanium alloy
by: Irshad Ahamad, Khilji
Published: (2023)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Optimization of machining parameters while wedming titanium alloy (T16AL4V)
by: Danial Ghodsiyeh
Published: (2025)

Performance of carbide tools and surface integrityof inconel alloy 718 in cryogenic and dry machining
by: Noureddin Abdulsalam Badroush (P75404)
Published: (2023)

Microstructure and corrosion analysis of coated bulk nanostructured aluminium alloy 6061
by: Nur Anis Nabila, Mokhtar
Published: (2024)

Investigation of machining parameters on abrasive water jet machined surface of glass/epoxy composites using Taguchi method
by: Mohd Azmir Mohd Azhari
Published: (2024)

Hybrid artificial fish and glowworm swarm optimization algorithm for electrical discharge machining of titanium alloy
by: Nurezayana Zainal
Published: (2025)

Improved machinability of titanium alloy TI-6AL-4V through workpiece preheating
by: Ginta, Turnad Lenggo
Published: (2024)

Solar irradiance forecasting using statistical and machine learning methods
by: Yew, Poh Leng
Published: (2023)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
by: Mohd Hafizu, Zakaria
Published: (2019)

Experimental study on the effect of tool life during the machining of Nimonic C-263 alloy using cryogenic coolant
by: Roslim, Muhammad Ikhwan
Published: (2024)