Characterization And Wear Performance Of Fabricated Alumina Based Cutting Tools

Alumina (Al2O3) based cutting tool known to has a superior hardness and capable to cut metal in high speed machining without any present of coolant. However, this cutting tool possess brittleness that causes early chipping and breakage when engaged with workpiece material. The purpose of this resear...

Full description

Bibliographic Details
Main Author:	Mokhtar, Muhammad Faiz
Format:	Thesis
Language:	English English
Published:	2020
Subjects:	T Technology (General) TJ Mechanical engineering and machinery
Online Access:	http://eprints.utem.edu.my/id/eprint/25435/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=119828
Abstract	Abstract here

Similar Items

Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
by: Mazda, Nur Syahirah
Published: (2018)

Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
by: Mat Amin, Mohd Imran
Published: (2018)

Development And Performance Analysis Of Alumina-Yttria Stabilized Zirconia-Chromia Cutting Tool For High Wear Performance
by: Tamin, Norfauzi
Published: (2020)

Effect of zirconia and chromia on the mechanical and tribology properties of alumina cutting tool
by: Abdul Manap, Muhamad Naim Fahmi
Published: (2021)

The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process
by: Juwara, Luqman Nul Hakim
Published: (2016)

Fabrication and characteristic study of alumina tool using cold isotatic press
by: Adam, Abdul Aziz
Published: (2014)

The Influence Of Tool Geometry Towards Cutting Performance On Aluminium 7075
by: Jumali, Muhammad Syafik
Published: (2016)

Measurement Of Nose Radius And Wear Of Multiple Cutting Tool Inserts From 2-D Scanned Images With Sub-Pixel Edge Detection
by: Lim , Teong Yeong
Published: (2015)

Study of performance of nickle quarry dust composite coated cutting tool
by: Ibrahim, Abdullahi Abdulrazak
Published: (2020)

Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation
by: Abd Aziz, Syazxerlin
Published: (2018)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
by: Mohd Hafizu, Zakaria
Published: (2019)

Thermal wear behaviour of H13 tool steel in die casting process
by: Abdulhadi, Hassan Abdulrssoul
Published: (2017)

Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel
by: Farhana, Yasmin
Published: (2021)

Study On The Development Of Ceramic Cutting Tool (ZTA / ZTA-MGO) And Its Machining Performance In Slot Milling
by: Hassan, Mohd Nor Hakim
Published: (2010)

Prediction of tool wear and surface roughness of waspaloy by using Artificial Neural Network (ANN)
by: Gan, Chin Ket
Published: (2021)

Machining performance of 22MnB5 Boron steel cutting tool with Al 6061 Aluminium Alloy
by: Mohd Rashid, Mohd Fairuz
Published: (2021)

Experimental Studies On Effect Of Process Parameters On Tool Wear In Drilling CFRP Composites With Ultrasonic Machine
by: Mohammed Muslem, Mohammed Bakar
Published: (2019)

Development of cutting tool through superplastic boronizing of duplex stainless steel /Sunita Harun
by: Sunita, Harun
Published: (2017)

Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni-based superalloy using cemented WC-Co tools
by: Nurul Hidayah, Razak
Published: (2017)

Enhancement the performance of wire cutting process by additives nanopowder alumina (Al2O3)
by: Abed, Farook Nehad
Published: (2021)

Analysis of surface intergrity and tool wear during machining high thermal conductivity steel 150 (HTCS- 150)
by: Wan Mohd Yusoff, Wan Mohd Azahar
Published: (2018)

Development of cutting tool through superplastic deformation methods on boronized duplex stainless steel / Mazlan Shah
by: Mazlan, Shah
Published: (2013)

Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool
by: Khuzaimi, Mohd Aris
Published: (2014)

Development of a Cutting Edge Temperature Measurement Device for End Mill Tool using Infrared Radiation Technique
by: Mohammad Ashaari, Kiprawi
Published: (2020)

Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide
by: Azhar, Anis Afuza
Published: (2019)

Influence of laser cutting parameters on the cutting quality of inconel 718
by: Mohd Halim, Nurhaliana Shazwani
Published: (2022)

Study On The Development Of Ceramic Cutting Tool (zta I Zta-mgo) And Its Machining Performance In Slot Milling
by: Hassan, Mohd Nor Hakim
Published: (2010)

Wear Resistance Performance Of Zirconia Toughened Alumina (ZTA) Cutting Tool Added With MgO and CeO2
by: Ali, Afifah Mohd.
Published: (2016)

Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools / Sunday Albert Lawal
by: Sunday, Albert Lawal
Published: (2013)

In Process Roughness Measurement And Tool Nose Radius Wear Assesment In Finish Turning Using Machine Vision
by: Balasundaram, Mohan Kumar
Published: (2017)

The optical properties of alumina and tirania naofluids / Saktiyaramana Karpayah
by: Saktiyaramana, Karpayah
Published: (2018)

Development Of Automated Coolant Supply (ACS) System In Improving Cutting Performance For CNC Milling Machining
by: Wan Md Hatta, Wan Nur 'Izzati
Published: (2019)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
by: Haghighi, Hamidreza Shahabi
Published: (2008)

Friction and wear characteristics of bio-lubricant enhanced with hBN and PKAC additives
by: Abdul Rashid, Nur Saidatul Fatimah
Published: (2017)

Wear mapping mechanism mapping for diesel-diluted biolubricant / Mohamad Firdaus Saharudin
by: Mohamad Firdaus , Saharudin
Published: (2022)

Modeling of cutting process and flow stress under high strain rate
by: Norfariza, Ab. Wahab
Published: (2015)

Study of wear mechanism in the contact between table liner and roller of vertical roller mills
by: Kamal, Ariffin
Published: (2011)

Microwave and conventional sintering of manganese-doped alumina: Densification and mechanical Properties / Salem Dhuban
by: Salem Omar Abdullah, Dhuban
Published: (2019)

Effect of ultrasonication on colloidal thermophysical and rheological properties of alumina-water nanofluid / Mohammed Mahbubul Islam
by: Mohammed, Mahbubul Islam
Published: (2015)

Optimisation of laser cutting parameters of oil palm wood / Harizam Mohd Zin
by: Harizam, Mohd Zin
Published: (2013)