Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI

The purpose of this research was to look into the tool life performance of uncoated carbide under dry settings, to find the best parameters for carbide tool performance under dry conditions, and to investigate the tool wear behavior under dry conditions. The notion of tool life is regarded to be the...

Full description

Bibliographic Details
Main Author:	Adam, Muhamad Alif
Format:	Thesis
Language:	English English
Published:	2023
Online Access:	http://eprints.utem.edu.my/id/eprint/27152/ https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=122847
Abstract	Abstract here

Similar Items

Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert
by: Mastuki, Ammar Aizat
Published: (2019)

Performance of carbide insert in turning of titanium alloy under carbon dioxide cryogenic cooling
by: Mat, Siti Asiyah
Published: (2021)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Improved machinability of titanium alloy TI-6AL-4V through workpiece preheating
by: Ginta, Turnad Lenggo
Published: (2024)

Chatter & machinability aspects in end milling of metal matrix composite (MMC) and titanium alloys -Ti-6A1-4V using carbide & pcd inserts
by: Nor Khairusshima Muhamad Khairussaleh
Published: (2024)

Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes
by: Jonid, Izyan Dayana
Published: (2019)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy
by: Abd. Rahim, Erween
Published: (2005)

Modeling of reactively sputtered TiAIN coating on tungsten carbide insert tool its properties and cutting performance in dry turning of AISI D2 steel
by: Budi, Esmar
Published: (2010)

The effect of substrate temperature of titanium aluminium nitride coating on titanium alloy (TI-6AL-4V) substrate using PVD method
by: Hamid Bahador
Published: (2025)

Modelling of stagnant zone formation on diamond cutting tool when turning titanium alloy
by: Thet Thet Mon
Published: (2025)

Experimental study on the aluminum alloy 7075 during turning under dry and minimal quantity lubrication conditions
by: Abdul Rahman Abdul Ghani
Published: (2024)

Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method
by: Jaafar, Noor Azam
Published: (2013)

Effect of electrode cooling on the performance of electrical discharge machining (EDM) of titanium alloy Ti-6A1-4V
by: Abdulkareem, Suleiman
Published: (2024)

Powder metallurgy compacted electrodes of electrical discharge machining for surface modification of titanium alloy (Ti-6AI-4V)
by: Ndaliman, Mohammed Baba
Published: (2024)

Performance of carbide tools and surface integrityof inconel alloy 718 in cryogenic and dry machining
by: Noureddin Abdulsalam Badroush (P75404)
Published: (2023)

Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools
by: Mohd Hafizu, Zakaria
Published: (2019)

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
by: Mohd Harun, Dalila
Published: (2020)

Influence of magnetic field from permanent magnets on chatter suppression in end milling of titanium alloy (Ti6A14V)
by: Syidatul Akma binti Sulaiman
Published: (2024)

Performance evaluation of ultrasonic assisted wire electrical discharge turning for TI-6AL-4V material
by: Mohd Zakaria, Muhammad Akmal
Published: (2023)

Development Of Fuzzy Logic Model For Turning Process Of Steel Alloy And Titanium Alloys
by: Tan, Jit Yean
Published: (2004)

Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions
by: Syeda Najiha, Masood
Published: (2015)

Embedment of hydroxyapatite (HA) on titanium alloy (Ti6AI4V) via superplastic deformation method for medical application / Hidayah Mohd Khalid
by: Hidayah, Mohd Khalid
Published: (2011)

Optimization of surface roughness using response surface methodology and genetic algorithm in high speed and milling of titanium alloy : Ti-6A1-4V
by: Md. Shah Alam
Published: (2024)

Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool
by: Khuzaimi, Mohd Aris
Published: (2014)

Performance evaluation of different types of graphite electrodes on titanium (Ti - 6A1 - 4V)
by: Abdul Haq, Reazul Haq
Published: (2009)

The effect of cryogenic carbon dioxide cooling on surface integrity of titanium alloy in turning
by: Razak, Muhammad Shahmi
Published: (2021)

Performance evaluation of finish hard turning using coated carbide cutting tools under minimum quantity lubrication
by: Elmunafi, Mohamed Handawi Saad
Published: (2025)

Ti-6a1-4V Alloy Coated With Bioceramics By Using Radiofrequency Plasma Sputtering Technique
by: Ali, Raheem Lafta
Published: (2016)

Ductility improvement of additively manufactured Ti6AL4V alloy through heat treatment / Siti Najihah Rahmad
by: Rahmad, Siti Najihah
Published: (2022)

Evaluation of tool wear and machined surface integrity when drilling aluminium alloy 7075 under cold air and dry conditions
by: Nur Munirah Meera Mydin
Published: (2024)

Mechanical and biological behaviors of titania and tantala nanotubular arrays decorated with silver oxide on Ti-6Al-4V alloy / Masoud Sarraf
by: Masoud , Sarraf
Published: (2017)

Optimization of machining parameters while wedming titanium alloy (T16AL4V)
by: Danial Ghodsiyeh
Published: (2025)

Solidification analysis of metal matrix composites aluminium 11.8% silicon alloy reinforced with titanium carbide particulates
by: Fatchurrohman, Nanang
Published: (2009)

Growth, characterization and gas sensing properties of one dimensional oxide nanostructures on Ti and Ti-6Al-4V alloy substrates synthesized by thermal oxidation / Md. Arafat Mahmood
by: Md. Arafat, Mahmood
Published: (2017)

Optimization of cutting parameters to reduce cutting tool temperature in a dry turning process using genetic algorithm
by: Muhammad Waseem
Published: (2014)

High speed end milling of cobalt chromium molybdenum alloy using carbide tool under various coolant strategies
by: Hainol Akhbar Zaman
Published: (2025)

Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools / Sunday Albert Lawal
by: Sunday, Albert Lawal
Published: (2013)

Drilling of autenitic stainless steel AISI 316L using carbide tools under different coolant conditions
by: Ahmad Zubair Sultan
Published: (2025)

Simulation of LM6 alloy with Ti-B refinement in squeeze casting process
by: Mona Kiaee,
Published: (2015)