Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA)

Aluminium (Al-Si-Cu) alloys are widely used in automotive, aerospace, and general engineering industries due to their excellent combination of properties, such as good castability, low coefficient of thermal expansion, and high strength-to-weight ratio. Recently, sustainability and recycling of reso...

Full description

Bibliographic Details
Main Author:	M El-Aswad, Ashraf Mahmood
Format:	Thesis
Language:	English English
Published:	2015
Subjects:	TA401-492 Materials of engineering and construction. Mechanics of materials
Online Access:	http://eprints.uthm.edu.my/1305/
Abstract	Abstract here

Similar Items

Effects of Grain Refinement on The Cooling Rate, and Microstructural and Mechanical Properties of Al-Si Sand Castings
by: Lim, Ying Pio
Published: (2006)

Magnetic Characteristics and Microstructure of Some Ferrite Antenna and Inductor Cores Doped with Co, Ca, and Si
by: Loh, Pit Mui
Published: (1996)

Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting
by: Ahmed Bhutto, Aqeel
Published: (2021)

Microstructural and mechanical properties of SiO₂-Na₂O-CaO-P₂O₅-CaF₂ Bioglass/Hydroxyapatite composite
by: Adnin, Noorfauzana
Published: (2018)

Thermal fluctuation and excess conductivity properties of YBCO-added CHITOSAN, CaO and Ca compound
by: Yap, Siew Hong
Published: (2024)

Influence of divalent Sr2+, Zn2+ AND Ca2+ substitutions on ultrasonic velocity and elastic properties of DyBa2Cu3O7-δ high temperature superconductors / Norashikin Abdul Rasih
by: Abdul Rasih, Norashikin
Published: (2011)

Optimization of stir casting process parameters of aluminium silicon carbide particulate composites
by: Abdulmumin, Adebisi Adetayo
Published: (2024)

Effects of CuO and SiO2 as reinforcement in aluminium (AA6061) chips hybrid nanocomposites using hot extrusion process
by: Hussein, Msebawi Muntadher Sabah Abdul
Published: (2022)

Structural, mechanical and bioactivity properties of SiO2-CaO-B2O3-Na2O-P2O5-CaF2 glass and glass-ceramics utilized eggshell as calcium source
by: Loh, Zhi Wei
Published: (2024)

Effect of graphene nanoparticle addition in YBa₂Cu₃Oy using thermal treatment method and fabrication of YBa₂Cu₃Oy with various liquid phase ratios via infiltration growth
by: Kamarudin, Aliah Nursyahirah
Published: (2021)

The effect of Pr substitution at sr sites in 110K phase of (Bi-Pb)-Sr-Ca-Cu-O superconducting ceramics / Nazarin Nordin
by: Nordin, Nazarin
Published: (2007)

Ketumpatan arus angkutan pita superkonduktor suhu tinggi (Bi, Pb)-Sr-Ca-Cu-O disarungi Ag dalam medan magnet
by: Lau Kok Tee
Published: (2023)

Synthesis, Characterization And Co2 Adsorption Of Caco3, Ca(Oh)2 And Inert Materials Incorporated Ca(Oh)2
by: Hlaing, Nwe Ni
Published: (2016)

Kesan kandungan fosfat dan suhu sinteran terhadap kaca sol-gel dalam sistem pertigaan (SiO2-CaO-P2O5) sebagai bahan implan bioaktif pukal
by: Syed Nuzul Fadzli Syed Adam (P58674)
Published: (2023)

Solidification, microstructure and mechanical properties of mg-nd-gd-zn-zr cast magnesium alloy with yttrium, erbium and samarium additions
by: M Elaswad, Ashraf Mahmood
Published: (2019)

The effects of silica (SiO2) derived from rice husk composition and sintering temperature on the fabrication of silica (SiO2) and silica-nickel oxide (SiO2-NiO) porous bodies
by: Abdul Rahim, Putri Syalabiah
Published: (2021)

Thermal diffusivity and electrical conductivity of ZnO-CuO ceramic composites at high temperatures
by: Md Akhir, Rabiatuladawiyah
Published: (2012)

Influence of CaCO₃ in glass fibre/unsaturated polyester composite on thermal and flexural creep behaviour
by: Johari, Ahmad Nazrin
Published: (2019)

Technical viability study of steel slag as non-conventional material in concrete / Kamran Shavarebi
by: Shavarebi, Kamran
Published: (2016)

Nio Modification Using Zr4+ And Ca2+ For Dielectric Improvement
by: Syed Salim, Sharifah Aishah
Published: (2013)

Effects of Zr and Sb addition on grain refinement, high temperature creep and hardness in Mg-3Ca alloys / Widyani Darham
by: Darham, Widyani
Published: (2019)

Fabrication and effect of applied field stresses on stability of ZnO ceramics with CaMnO₃ as additive for varistor application
by: Lakin, Ismail Ibrahim
Published: (2015)

Effect Of Zn Addition On Microstructure, Intermetallic Compound Formation And Mechanical Properties Of Sn-0.7cu Solder On Cu Substrate
by: Ghani, Fitriah Abdul
Published: (2018)

Influence of CNT, TiO2 and SiC nanostructure additions on microstructural and superconducting properties OF YBa2Cu3O7−δ synthesized using thermal treatment
by: Barood, Fatma Ali Alfirgan
Published: (2023)

Fabrication of Cu2O based homostructure thin film using electrodeposition method
by: Mohamad Arifin, Nurliyana
Published: (2018)

Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures
by: Muda, Rizamarhaiza
Published: (2021)

Development of a Ceramic Foam Filter for Filtering Molten Aluminum Alloy in Casting Processes
by: Bagherian, Ehsaanreza
Published: (2009)

Characterisation of nano whiskers from kenaf bast and effects on bionanocomposites via solution casting
by: Zaini, Lukmanul Hakim
Published: (2013)

Characterization And Corrosion Behaviour Of 96.5sn-3.0ag- 0.5cu Solder On Cu Substrate At Different Reflow Reactions
by: Lee , Liu Mei
Published: (2013)

Microstructure and dielectric properties of La1-x(Ba,Ca)x Mn0.40Ti0.60O3 (0.30 ≤ x ≤ 0.50) ceramic systems
by: Sinin, Aaliyawani Ezzerin
Published: (2015)

Fabrication And Characterization Of Electrochemically Formed Nanocrystalline Porous Si And Gaas [TA418.9.N35 B152 2008 f rb].
by: Ali Al-Obaidi, Nihad Khalaf
Published: (2008)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb].
by: Altayef Al-Jubouri, Ali Abadi
Published: (2006)

Y2O3 And CaO Zirconia as Reinforcement for Hydroxyapatite Biocomposite
by: Zaw , Linn Htun
Published: (2016)

The effect of glass addition and the grain diameters on dielectric properties of CaCu₃Ti₄O₁₂ (CCTO) / Masturah Mohamed
by: Mohamed, Masturah
Published: (2016)

Effects of strontium substitution on structural, electrical and magnetic properties of polycrystalline and nanocrystalline La₀.₆₇(Ca₁₋χSrχ)₀.₃₃MnO₃
by: Chang, Sen Choung
Published: (2014)

Optimization of silver nanoparticles sizes in ag-cu nanopaste as die-attach materials for high temperature applications
by: Noordin, Norasiah Mohammad
Published: (2017)

Visible-light photodegradation of nitrobenzene by microwave synthesized ZnO and its nanocomposites Ag/ZnO and Cu/ZnO
by: Sidi, Hauwa Aliyu
Published: (2014)

Effects of nanometer yAl203 addition on superconducting properties of Bi16Pbo.4Sr2Ca2Cii30x (Bi-2223) superconductor / Masnita Mat Jusoh
by: Mat Jusoh, Masnita
Published: (2011)

Penghasilan Dan Pencirian Komposit Matriks Zn Diperkuat Partikel SiC Melalui Kaedah Metalurgi Serbuk. [TA418.9.C6 J94 2003 f rb] [Microfiche 7546]
by: Mohamed, Julie Juliewatty
Published: (2003)

Development Of Ternary Ni-Ag-P And Ni-Cu-P Using Electroless Coating On Copper Substrate
by: Md Sani, Nur Ariffah
Published: (2015)