Prediction of ultimate load bearing capacity of driven piles

Due to variation in soil layers, it is not easy for engineer to be assured that theoretical design of piles comply with the actual site condition. Thus, every design of piled foundations carries its own uncertainty and risk. This project evaluates the applicability of eight methods to predict the ul...

書目詳細資料
主要作者:	Wong, Charng Chen
格式:	Thesis
語言:	英语
出版:	2006
主題:	TA Engineering (General). Civil engineering (General) TH Building construction
在線閱讀:	http://eprints.utm.my/1811/1/WongCharngChenMFKA2006.pdf

相似書籍

Comparison of ultimate bearing capacity obtained by pile driving analyzer and maintained load test
由: Rajasvaran, Kamalendran N.
出版: (2007)

Prediction of ultimate bored pile capacity using global strain extensometer
由: Badrun, Mohd. Zahrullail
出版: (2011)

Evaluation of bearing capacity due to radial expansion using expanding piles
由: Molkaraie, Pouya
出版: (2013)

Load resistance behaviour and installation assessment of driven spun pile
由: Karunanidee, Vigneshwaran
出版: (2010)

Pile capacity prediction by characteristic stress-wave method
由: Uddin Khaled, Md. Shahab
出版: (1997)

Interpretation on pile capacity from instrumented sacrifical pile load test for deep foundation system
由: Abdul Razak, Nurul Husna
出版: (2020)

Performance of bearing capacity for eco-friendly raft pile foundation system (ERP System) in soft soil
由: Abdul Rahman, Siti Saimah
出版: (2015)

The appraisal of moment capacity of short pile subjected to lateral load in sand
由: Sulistyono, Chosun Eko
出版: (1999)

Soil Pile Set-Up Of Driven Pile In Clay
由: Ng, Wen Kuan
出版: (2013)

Bearing capacity of circular footing on geocell reinforced sand deposit under cyclic loading
由: Oghabi, Mohsen
出版: (2015)

Static load test - a comparison of ultimate load between statnamic and maintained load test
由: Azmi, Mastura
出版: (2005)

The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall
由: Mohamad, Noridah
出版: (2010)

Numerical analysis on static load capacity of prestressed concrete sleepers under hypothetical bearing pressure distribution
由: Wan Abdul Rashid, Wan Azlan
出版: (2012)

Evaluation of pile capacity from cone penetration test data
由: Shoib, Shamsul Anuar
出版: (2010)

Estimation of base capacity for bored pile embedded in hard stratum
由: Ahmad Mazlan, Anum Syahirah
出版: (2015)

The reliability of ‘development length test and ultimate load test’ on prestress concrete sleepers
由: Ali, Siti Norbaizura
出版: (2012)

Numerical simulation of bearing capacity for rigid footing on cohesive soil
由: Yusof, Zarina
出版: (2013)

Correlation between cone penetration test and bearing capacity for shallow foundation
由: Ahmad, Mazlan
出版: (2007)

Behaviour of laterally loaded bored pile in reclaimed land
由: Somasundaram, Vijayakumar
出版: (2010)

Bearing capacity, comparison of results from Plaxis 2D and empirical model
由: Hong, Puan Yee
出版: (2017)

Development and Applications of Artificial Neural Network for Prediction of Ultimate Bearing Capacity of Soil and Compressive Strength of Concrete
由: Seyed Hakim, Seyed Jamalaldin
出版: (2006)

Load transfer behaviour of bored piles in old alluvium formation
由: Kobarajah, Liknaswaran
出版: (2007)

Comparison between methods of analysis for deflection of laterally loaded piles
由: Low, Siaw Mei
出版: (2007)

Behaviour of expanded piles in clay under uplift and compressive loading
由: Alimohammadi, Payman
出版: (2014)

Performance of geothermal energy piles under thermo-axial loads
由: Amaludin, Adriana Erica
出版: (2015)

Prediction of shaft resistance of bored pile in limestone formation
由: Chew, Siow Jin
出版: (2012)

Performance of load-bearing precast concrete wall with base isolation subjected to seismic loadings
由: Tiong, Patrick Liq Yee
出版: (2014)

Correlation between N-Value from standard penetration test and allowable bearing capacity of soil
由: Jayakumaran, Raguraman
出版: (2007)

Bearing capacity of soft soil reinforced by bottom ash columns using PLAXIS 3D
由: AbdulKrem, AbdulRahman Zahid
出版: (2021)

Prediction of bearing capacity of bored pile socketted in limestone of varying rock quality designation
由: Jahanmirinezhad, Hossein
出版: (2011)

An evaluation of ultimate strength and the performance of timber beams
由: Khin, Maung Zaw
出版: (2002)

Ultimate strength of glued-laminated timber beam
由: Baharudin, Khairul Salleh
出版: (1996)

A comparison of pile performance base on static formulas and dynamic load test
由: Ramli, Muhd. Harris
出版: (2006)

A compressive concrete strength prediction model using artificial neural networks
由: Guoji, Zang
出版: (2017)

Behaviour of reinforced concrete frame at ultimate limit state
由: Abu Bakar, Mohd. Azmir
出版: (2005)

Ultimate behaviour of reinforced concrete shear walls with octagonal openings
由: Hatami, Somaieh
出版: (2015)

A comparison between static load test and high strain dynamic test on bored piles
由: Murugun @ Arokiasamy, Michael Angelo
出版: (2006)

Design verification on bored pile within Kenny Hill formation via static load test
由: Mohamed, Zalina
出版: (2010)

Load carrying capacity of dry floor panel system
由: Te, Chei Yean
出版: (2006)

Capacity determination of intermodal container frame in resisting housing load
由: Ong, Zhen Ling
出版: (2019)