Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation

Minimum quantity lubrication (MQL) machining is one of the promising solutions to the requirement for reducing cutting fluid consumption. The work here describes MQL machining in a range of lubricant consumption of 2.0-2.355ml/s, which is between 10– 100 times lesser than the consumption usually...

Description complète

Détails bibliographiques
Auteur principal:	Sapian, Nik Fazli
Format:	Dissertation
Langue:	anglais anglais anglais
Publié:	2012
Sujets:	TJ Mechanical engineering and machinery TJ1040-1119 Machinery exclusive of prime movers
Accès en ligne:	http://eprints.uthm.edu.my/2000/
Abstract	Abstract here

Documents similaires

Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique
par: Dorairaju, Hemarani
Publié: (2015)

Effect of electro-carburisation process on the tribological behavior of mild steel
par: Ling, Jester Lih Jie
Publié: (2017)

Effect of electro-carburisation process on the tribological behavior of mild steel
par: Ling, Jester Lih Jie
Publié: (2017)

Effect of WS₂ and TiO₂ nanoparticles on the tribological characteristics of ta-C coating
par: Yeoh, Chin Ean
Publié: (2017)

Enhancement of bearing defect diagnosis via genetic algorithm optimized feature selection
par: Chia, Yee Shin
Publié: (2015)

Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh
par: Yusof, Mohd Khairul Azhar
Publié: (2014)

Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing
par: Yaacob, Zaihar
Publié: (2005)

Monitoring and prediction of bearing failure by acoustic emission and neural network
par: Mahamad, Abd Kadir
Publié: (2005)

Design and development of a brake system using smart materials
par: Johar, Muhammad Akmal
Publié: (2007)

Analysis of temperature distribution in disc brakes
par: Mohd Amin, Azriszul
Publié: (2007)

Development of online speed trap system (DOSTS)
par: Ishak, Maizul
Publié: (2006)

Delamination-fretting wear failure evaluation at HAp-Ti-6Al-4V interface of artificial hip implant
par: Muniandy, Nagentrau
Publié: (2021)

An enhancement of energy efficiency based on the voltage reduction with optimal capacitor placement and sizing / Zilaila Zakaria
par: Zakaria, Zilaila
Publié: (2017)

Optimization and tribological properties of semi metallic friction materials / Aznifa Mahyam Zaharudin
par: Zaharudin, Aznifa Mahyam
Publié: (2017)

Three dimensional cutting force and tool deflection in micro-end milling AISI D2 / Noor Aniza Norrdin
par: Norrdin, Noor Aniza
Publié: (2016)

The improvements of spark ignition (SI) engine's performance and emissions using different research octane number (RON) gasoline blend with ethanol - methanol / Md. Farid Md. Boizi
par: Md. Boizi, Md. Farid
Publié: (2021)

Integration chatter avoidance and minimum quantity lubrication condition in machining process
par: Wan Mohd Azlan, Wan Mohd Nowalid
Publié: (2019)

Performance of Minimum Quantity Lubrication System with Vegetable Oils in Turning
par: Teo, Chong Yaw
Publié: (2017)

Hybrid-inspired coolant additive for radiator application
par: Benedict Foo, Jing Siong
Publié: (2020)

Thermophysical evaluation of nanocellulose as a new coolant for radiator
par: Ganesan, Kadirgama
Publié: (2018)

Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel
par: Keeran, Anamalai
Publié: (2019)

Numerical simulation of heat transfers on a circular cylinder by an impinging jet with nanofluid
par: Jaber Al-Talqani, Ayad Jasim
Publié: (2014)

Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance
par: Lingenthiran, Samylingam
Publié: (2019)

Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method
par: WAN FARHANA, MOHAMAD
Publié: (2021)

Forward and backward fuzzy economic order quantity models considering learning theory / Ehsan Shekarian
par: Ehsan , Shekarian
Publié: (2017)

Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant
par: Yogeswaran, Muthusamy
Publié: (2012)

Tribological behavior of waste cooking oil blended lubricant
par: Sakinah, Muhamad Hisham
Publié: (2017)

The effect on usage of quarry dust suspension as coolant in drilling of titanium alloy
par: Kursus, Maisarah
Publié: (2022)

Simulation and experimental study of multi nozzle arrangements on electrospun jets and their resultant nanofibrous properties / Hanna Sofia Saleh Hudin
par: Hanna Sofia , Saleh Hudin
Publié: (2024)

Study on the application of ionic liquids in bio-based lubricant for a sustainable machining process
par: Amiril, S. A.S.
Publié: (2018)

Tribological performance of palm oil-based lubricant with nanoparticles additive / Mohamad Faizal Rosli
par: Mohamad Faizal , Rosli
Publié: (2019)

Production of sustainable bio-jet fuel via single-step deoxygenation of palm-based feedstock / Elaine Why Siew Kuan
par: Elaine Why , Siew Kuan
Publié: (2022)

Development Of Automated Coolant Supply (ACS) System In Improving Cutting Performance For CNC Milling Machining
par: Wan Md Hatta, Wan Nur 'Izzati
Publié: (2019)

Tribological behaviour of copper (II) oxide nanoparticles based lubricant to improve durability of contact surface
par: Maizatul Asnida, Hassan
Publié: (2018)

A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant
par: Haque, Muhammad Ehteshamul
Publié: (2019)

Experimental Investigation On Tribological Properties Of Natural Oil-Based Lubricants As Sustainable Bio-Lubricants
par: Md Jasman, Md Eirfan Safwan
Publié: (2018)

Tribological study of polyol ester-based biolubricants and the effect of molybdenum sulphide as lubricant additives / Nurul Adzlin Zainal
par: Nurul Adzlin, Zainal
Publié: (2019)

Investigations on heavy-duty gearboxes temperature and the viscosity of the lubricant through simulation and experiment method / Navin Kumar Ganesan
par: Navin Kumar, Ganesan
Publié: (2022)

Numerical simulation of jet impingement cooling on a smooth concave surface
par: Md Seri, Suzairin
Publié: (2009)

Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba
par: Nor Salim, Nor Adrian
Publié: (2012)