Engineering properties and microstructure of brickwork under aggressive environment

The influence of aggressive environmental exposures on the mechanical properties and performance of masonry systems has been investigated. The investigation involved the measurement of moisture movement, strength and modulus of elasticity of single leaf masonry walls which were built from fired-c...

Description complète

Détails bibliographiques
Auteur principal:	Wan Ibrahim, Mohd Haziman
Format:	Thèse
Langue:	anglais
Publié:	2011
Sujets:	TA Engineering (General). Civil engineering (General) TA401-492 Materials of engineering and construction. Mechanics of materials
Accès en ligne:	http://eprints.uthm.edu.my/3034/
Abstract	Abstract here

Documents similaires

Engineering properties and microstructure of brickwork under aggressive environment.
par: Ibrahim, Mohd Haziman Wan
Publié: (2011)

Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment
par: Ali, Sajjad
Publié: (2019)

Effect of quenching and post heat-treatment process to the microstructure and physical properties of electro-carb
par: Sow, Chan On
Publié: (2023)

Effect Of Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Low Carbon Steel Using Martensite Starting Microstructure
par: Ahmad, Muhammad Syafiq
Publié: (2020)

Water permeability of foamed concrete
par: Wan Ibrahim, Mohd Haziman
Publié: (2004)

Effect Of Annealing On Microstructure And Mechanical Properties Of 0.06% Carbon Steel
par: Phoumiphon, Nordala
Publié: (2017)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb].
par: Altayef Al-Jubouri, Ali Abadi
Publié: (2006)

Effect Of Magnesium And Tin As Sintering Additives On Microstructure And Compressive Properties Of Porous Aluminum
par: Ahmad Hamdi, Amirah
Publié: (2018)

Engineering properties of ring shaped polytheylene terephthalate (RPET) fiber self-compacting concrete
par: Sheikh Khalid, Faisal
Publié: (2015)

The Effect Of Pre - Treatment Followed By Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Al 5052 Alloy
par: Norazman, Muhammad Anas
Publié: (2017)

Microstructure Analysis, Mechanical Properties And Corrosion Behaviour Of Cryorolled Aluminium 1100 Alloy With Different Heat Treatment
par: Zakaria, Siti Aminah
Publié: (2018)

Effect Of Zn Addition On Microstructure, Intermetallic Compound Formation And Mechanical Properties Of Sn-0.7cu Solder On Cu Substrate
par: Ghani, Fitriah Abdul
Publié: (2018)

Water permeability of foamed concrete
par: Wan Ibrahim, Mohd Haziman
Publié: (2004)

Evaluation Of Pdms-Based Uv-Crosslinked Hydrogels Properties For Tissue Engineering Applications
par: Lim, Kar Wai
Publié: (2018)

Properties and performance of high strength fibre reinforced concrete by using steel and polypropylene fibres
par: Wan Jusoh, Wan Amizah
Publié: (2019)

Effect Of Indium On Microstructure And Intermetallic Compound Formation During Isothermal Aging Of Sncu Solder Alloy
par: Khusaini, Nur Nadirah Mohd
Publié: (2018)

Behavior of concrete-filled pvc tube columns under axial load
par: Abdulrazzaq Azeez, Alyaa
Publié: (2018)

Effect of indium addition on microstructure, wettability, shear strength and creep behavior of sn100c solder
par: Abdullah, Nabihah
Publié: (2019)

Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder
par: Abdullah, Nabihah
Publié: (2019)

The concrete structure remedial assessements in marine environment from whole life asset management perspectives
par: Mohd Salleh, Mohd Rezal
Publié: (2008)

A modified flower pollination algorithm and carnivorous plant algorithm for solving engineering optimization problem
par: Ong, Kok Meng
Publié: (2021)

Self compacting concrete containing polypropylene fibre and its behaviour as wall panel under cyclic load
par: Khalaf Al-Alwani, Anas Qasim
Publié: (2018)

Mechanical behaviour and energy absorption performances of composite foam-filled circular tubes under axial loadings
par: Subramaniyan, S Kanna
Publié: (2013)

Structural behaviour of precast concrete sandwich panel using recycled aggregate concrete under transverse load
par: Al. Mabrouk Khalifa, Hamza Masaud
Publié: (2013)

Delamination damage of carbon fiber-reinforced polymer composite laminates under cyclic shear-induced loading conditions
par: Abdullah, Muhammad A’imullah
Publié: (2018)

Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
par: Syukron, Muhammad
Publié: (2016)

Structural performance of precast self-compacting concrete beam consisiting banana skin powder and coir fibre under flexural load
par: Tahir, Muhammad
Publié: (2018)

Optically Pumped Lasing Properties Of ZnO Nanorods
par: Nordin, Muhammad Nuri
Publié: (2018)

Mechanical properties of ceramic tiles by replacement of quartz by RHA and POFA
par: Jamo, Hassan Usman
Publié: (2015)

Fabrication, characterisation and properties of polysiloxane rice husk silica composites
par: Azmi, Mohd Azham
Publié: (2018)

Effect of waste plaster of Paris on physical and mechanical properties of ceramic pottery body
par: Mat Nawi, Abdullah
Publié: (2016)

Properties and environmental impact of recycling cigarette butts (CBs) in fired clay brick
par: Sarani, Noor Amira
Publié: (2014)

Investigation the effect of expanded graphite modification on tensile properties and adhesive of epoxy composite
par: Che Berhanuddin, Nurul Idani
Publié: (2018)

The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips
par: Samsi, Mohd Arif
Publié: (2017)

A study on wettability properties of rutile-phase TiO2 nanostructure film
par: Taib, Syafa Syahirah
Publié: (2020)

Properties and environmental impact from mosaic sludge industry incorporated into fired clay bricks
par: Abdul Rahim, Ahmad Shayuti
Publié: (2016)

Physical and acoustic properties of petroleum and renewable based polyurethane foam filled with shorea leprosula
par: Mohd Azahari, Muhammad Shafiq
Publié: (2018)

Porosity study and effects on mechanical properties of discontinuous reinforced metal matrix composite (DRMMC)
par: Syed Ahmad, Syarifah Nur Aqida
Publié: (2004)

The effect of Meranti Merah wood fiber loading and sizes to the absorption property of polymer foam composites
par: Zaliran, Muhammad Taufiq
Publié: (2018)

Effect of rice husk silica reinforcement on recycled aa7075 aluminum chip matrix composite properties
par: Mohd Joharudin, Nurul Farahin
Publié: (2020)