Removal efficiency for heavy metals ions with granular resin and fibrous adsorbent

Pollution of wastewater in the battery industry with heavy metals such as Ni(II), Zn(II) and Pb(II) is an alarming environmental threat posing significant hazard to human, animal and aquatic life. Removal of these metal ions by ion exchange resins has been widely practiced. However, ion exchange tec...

Description complète

Détails bibliographiques
Auteur principal:	Hamdzah, Myzairah
Format:	Thèse
Langue:	anglais
Publié:	2018
Sujets:	TJ Mechanical engineering and machinery
Accès en ligne:	http://eprints.utm.my/79155/1/MyzairahHamdzahPFKM2018.pdf

Documents similaires

Low pressure reverse osmosis membrane for rejection of heavy metals
par: Hamdzah, Myzairah
Publié: (2007)

Nanocellulose-based adsorbent from pandan leaves for copper ions removal from wastewater
par: Haziqatulhanis, Ibrahim
Publié: (2023)

Potential Of Modified Gambir As Adsorbent For The Removal Of Selected Heavy Metal Ions From Aqueous Solutions
par: Tong, Kim Suan
Publié: (2014)

Fabrication and characterisation of highly aligned fibrous assemblies / Tan Chin Joo
par: Tan , Chin Joo
Publié: (2020)

Removal of Ni (II) and Pb (II) ions from aqueous solution using Amberlyst-15 ion exchange resin as an adsorbent
par: Alamin, Nayma Mohamed Asalmi
Publié: (2017)

Numerical modeling and simulation of material removal in laser drilling of thin metal sheets using meshfree collocation methods / Diaa Abdelmonem Mahmoud Abidou
par: Diaa Abdelmonem , Mahmoud Abidou
Publié: (2017)

Comparison studies of coagulants efficiency removal of heavy metals by chemical precipitation
par: Ang, Kian Bing
Publié: (1995)

Synthesis and application of amine and iminodiacetate chelating resin for removal of heavy metals from industrial wastewater
par: Wong, Hai Fatt
Publié: (2013)

Modification of ion exchange resin with magnetite for chromium removal
par: Jaffar, Filzah Hazirah
Publié: (2021)

Preparation And Evaluation Of Mangrove Tannins-Based Adsorbent For The Removal Of Heavy Metal Ions From Aqueous Solution [QD327. C559 2008 f rb].
par: Oo, Chuan Wei
Publié: (2008)

Preparation and characterization of radiation grafted fibrous adsorbent containing N-methyl-D-glucamine for boron removal
par: Ting, Teo Ming
Publié: (2015)

Graft copolymerization of acrylonitrile onto recycled newspaper-cellulose based adsorbent for heavy metals removal
par: Awang, Nor Asikin
Publié: (2020)

Lubrication effect of metal-on-metal in hip joint replacement
par: Mohd. Suri, Mohd. Syafiq
Publié: (2014)

Development of b-type and multi-ion doped carbonated hydroxyapatite bioceramics / Marjan Safarzadeh
par: Marjan , Safarzadeh
Publié: (2020)

Evaluation pf razor clam (Ensis directus) shell as an adsorbent for removal of heavy metals and dyes from aqueous solution
par: Lila Elamari Mohamed Areibat
Publié: (2018)

Development of biosorbent film based on eggshell and orange peel for removal of heavy metal ions
par: Vonnie Merillyn Joseph
Publié: (2023)

Radiation modified chitosan/polyvinyl alcohol film with polyvinyl pyrrolidone coating for heavy metal ion removal / Norhashidah Talip
par: Norhashidah , Talip
Publié: (2020)

Cost-efficiency analysis in support of the energy efficiency standard and label for TV sets in Malaysia / Mahendra Varman.
par: Mahendra, Varman
Publié: (2004)

Investigations on heavy-duty gearboxes temperature and the viscosity of the lubricant through simulation and experiment method / Navin Kumar Ganesan
par: Navin Kumar, Ganesan
Publié: (2022)

Modeling of heavy vehicle braking related to accident reconstruction for a range of vehicle and road characteristics / Mahdieh Zamzamzadeh
par: Mahdieh , Zamzamzadeh
Publié: (2020)

Development of collision avoidance warning system for heavy vehicles featuring adaptive minimum safe distance / Airul Sharizli Abdullah
par: Airul Sharizli, Abdullah
Publié: (2017)

Human reach for safety, comfort and efficiency at work
par: Kasgari, Roja Abedian
Publié: (2012)

Numerical analysis on the effects of cavity geometry with heat towards contaminant removal
par: Asril Saadun, Mohd. Noor
Publié: (2012)

Numerical characterization of perforated metallic hollow sphere structures
par: Hossein Hosseini, Seyed Mohammad
Publié: (2009)

Transient removal of contaminant from a channel with differentially heated wall of cavity
par: Khairul Yusri, Ahmat Rajab
Publié: (2022)

Development of durian peel-based adsorbent for zinc and lead ions removal
par: Ngabura, Mohammed
Publié: (2020)

Hydroxyapatite coating on metallic biomaterials prepared by sol-gel method
par: Jafari, Sajjad
Publié: (2010)

Assemblability design efficiency (ADE) analyses for design for automatic assemblies
par: Zubir @ Zubair, Baizura
Publié: (2007)

Preparation of activated carbon nanomaterial from palm oil kernel shell for removal of heavy metal ions
par: Baby, Rabia
Publié: (2022)

Removal of heavy metal ions from aqueous solutions by polymer-enhanced ultrafiltration / Nurul Huda Baharuddin
par: Nurul Huda, Baharuddin
Publié: (2015)

Quasi-static and low-velocity impact response on fibre metal laminate
par: Nur Khaleeda, Romli
Publié: (2018)

Investigation on mechanical and modal properties of aluminium based fibre metal laminates
par: Mohamad Nazirul Mubin, Merzuki
Publié: (2020)

Tribological studies of metal v-belt cvt lubricants for automotive application
par: Abdul Kadir, Khairuldean
Publié: (2013)

Impulsive sheet metal forming based on standoff charge for conical geometry
par: Alipour, Roozbeh
Publié: (2017)

Barrier analysis approach in metal additive manufacturing implementation with environment consideration
par: Lee, Ke Yin
Publié: (2022)

Fractal and probabilistic analysis on fatigue crack growth rate of metallic materials
par: Hashmi, Mudassar Hussain
Publié: (2023)

Effect of pretreatment parameters on surface roughness and cobalt removal of tungsten carbide before diamond coating
par: Shirdar, Mostafa Rezazadeh
Publié: (2012)

Variable speed drives as energy efficient strategy in pulp and paper industry
par: Syed Mustaffah, Sharifah Azma
Publié: (2006)

Assemblability design efficiency (ADE) analyses for design for automatic assemblies (DFAA)
par: Zubir @ Zubair, Baizura
Publié: (2007)

Microstructures and properties of CoCrMo alloy by metal injection moulding process
par: Nur Aidah Nabihah, Dandang
Publié: (2019)