Performance modelling of refrigerants in a vapor compression refrigeration cycle

The simulation model based on the actual vapor compression cycle is performed in order to evaluate the performance of 14 refrigerants in terms of first law and second law efficiency. A 10% pressure drop is modelled in both the condenser and evaporator. The refrigerants that have been evaluated...

Full description

Bibliographic Details
Main Author:	Basharie, Siti Mariam
Format:	Thesis
Language:	English
Published:	2005
Subjects:	TJ Mechanical engineering and machinery TJ255-265 Heat engines
Online Access:	http://eprints.uthm.edu.my/8011/
Abstract	Abstract here

Similar Items

Performance Study Of Energy Recovery System With Two Different Sizes Of Heat Exchanger Under Hot-Humid Environment
by: Abul Rahman, Siti Masitah
Published: (2018)

Numerical study of jet impingement cooling on a smooth curve surface
by: Hayder, Ali Mohammed
Published: (2014)

Characterisation of heat and mass transfer in the rectangular flat-sheet polyvinylidene flouride membrane for vacuum membrane distillation
by: Chiam, Chel Ken
Published: (2014)

The experimental study and numerical simulation of falling liquid film flow on horizontal tubes
by: Hassan, Ibnu Anas
Published: (2017)

Rapid premixing fuel-water injector in burner combustion
by: Suardi, Mirnah
Published: (2015)

Design of heat exhanger network using pinch method
by: Wan Mansor, Wan Nurdiyana
Published: (2006)

Heat Pipes In Electronic Packaging [TJ264. S774 2007 f rb].
by: Munusamy, Sri Jaiandran
Published: (2006)

Evaluation of heat exchanger on thermoacoustic performance
by: Yahaya, Mohd Zubir
Published: (2013)

Modelling and control of heat exchanger by using bio-inspired algorithm
by: Daud, Nur Atiqah
Published: (2014)

Numerical simulation of jet impingement cooling on a smooth concave surface
by: Md Seri, Suzairin
Published: (2009)

The application of energy analysis on an educational steam power plant
by: Mohmad Jaat, Md. Norrizam
Published: (2005)

Energy efficient building : the application of thermal energy storage (TES) for cooling load reduction
by: Tee, Swee Yin
Published: (2008)

Analysis of characteristic heat pipe as an efficient cooling heat transfer device
by: Alfan, Norman Hafizi
Published: (2013)

Energy efficient building: the application of thermal energy storage (TES) for cooling load reduction
by: Tee, Swee Yin
Published: (2008)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba
by: Nor Salim, Nor Adrian
Published: (2012)

Finite element simulation of machining AISI 1045 steel using uncoated carbide tool
by: Mohmd Arifin, Nabila Afif
Published: (2012)

Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba
by: Nor Salim, Nor Adrian
Published: (2012)

Thermal performance enhancement of a heat exchanger using metal chain as a novel turbulator
by: Ghitheeth, Ali Hussein
Published: (2021)

A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant
by: Haque, Muhammad Ehteshamul
Published: (2019)

Role of thermo-physical properties of refrigerant on the thermal performance of a refrigeration system / Sa'adah Ahmad @ Ahmad Sowi
by: Sa'adah, Ahmad @ Ahmad Sowi
Published: (2013)

Performance study between variable refrigerant flow and chilled water air conditioning system / Muhamad Nurshafiq Mohd Yunos
by: Muhamad Nurshafiq , Mohd Yunos
Published: (2019)

A Study For The Potential Of Ammonia-Wood Charcoal Adsorption Refrigeration System
by: Wong , Chee Khoon
Published: (2012)

Energy performance comparison between the variable refrigerant flow (VRT) and conventional air-conditioning and mechanical ventilation (ACMV) systems for tropical buildings / Muhammad 'Amir Roslan
by: Muhammad 'Amir, Roslan
Published: (2019)

Heat transfer and energy efficiency analysis of domestic refrigerator using nanorefrigerant / Farhood Sarrafzadeh Javadi
by: Farhood, Sarrafzadeh Javadi
Published: (2013)

Wireless A/C compressor vibration diagnostics using machine learning-based signal analysis Z-Freq 2D with refrigerant and oil as faults
by: Yusri, Muhammad Yuszairie
Published: (2024)

Energy, exergy and heat transfer performance investigation of a vapor compression air conditioning system / Jamal Uddin Ahamed
by: Jamal , Uddin Ahamedf
Published: (2012)

Development of new injector for compressed natural gas engine and the effect on performance
by: Semin, Semin
Published: (2011)

Engine combustion, performance, and emission characteristics of hermetia illucens larvae oil in a compression ignition engine
by: Mohd Kamal, Kamarulzaman
Published: (2021)

Tribology, performance and emissions of a two stroke-cycle engine using bio-based lubricant / Muhammad Zulfattah Zakaria
by: Muhammad Zulfattah , Zakaria
Published: (2021)

Numerical investigation on combustion, performance and emissions characteristics in homogeneous charge compression ignition engine
by: Hasan, Mohammad Mehedi
Published: (2016)

Development of refrigerant (R32) flow maldistribution model for microchannel heat exchanger
by: Chng, Ming Hui
Published: (2016)

Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis
by: Mohd Adnin, Hamidi
Published: (2013)

Cycle Time Analysis For Photolithography Tools In Semiconductor Manufacturing Industry With Simulation Model: A Case Study
by: Siow, Yuen Tien
Published: (2008)

Superplastic boronizing on duplex stainless steel (DSS) using compression method / Yong Siu Fung.
by: Yong, Siu Fung
Published: (2011)

Compressive strength and microstructural characterization of porous nickel brazed to copper and stainless steel / Ramizah Rozaimay
by: Ramizah , Rozaimay
Published: (2024)

Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends
by: Che Wan Mohd Noor, Che Wan Othman
Published: (2019)

Optimum Cycle Time Based On Jig And Workstation Design Combinations
by: Nabilah, Mohd Safar
Published: (2010)

An improvement of mechanical properties of ductile iron and niobium alloyed ductile iron through new heat treatment cycles / Bulan Abdullah
by: Abdullah, Bulan
Published: (2011)

Modelling of the flow of refrigerant 134a in capillary tubes
by: Sadikin, Azmahani
Published: (2004)