Items where Author is "NOR, NOR HAFIEZ BIN MOHAMAD"

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Sintering Parameter Optimization of Titanium Injection Molding For Multiple Performance Using Grey Relational Analysis. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) OPTIMIZATION OF MICRO METAL INJECTION MOLDING FOR HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Rheological Investigation of Gas Atomized Titanium Powder for Metal Injection Molding Using Palm Stearin Binder System. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) INJECTION MOLDING PARAMETER OPTIMIZATION OF TITANIUM ALLOY POWDER MIX WITH PALM STEARIN AND POLYETHYLENE FOR GREEN DEFECTS USING TAGUCHI METHOD. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Multiple Performance Optimization for the Best Metal Injection Molding (MIM) Green Compact. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Injection Molding Parameter Optimization of Titanium Alloy Powder Mix with Palm Stearin and Polyethylene for Multiple Performance Using Grey Relational Analysis. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) TAGUCHI METHOD FOR THE DETERMINATION OF OPTIMISED SINTERING PARAMETERS OF TITANIUM ALLOY FOAMS. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) Orthogonal Array Technique for Optimizing the Sintering Parameter of the Metal Injection Molding (MIM) Compact: Best Flexure Strength. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) CHARACTERISATION OF TITANIUM ALLOY FEEDSTOCK FOR METAL INJECTION MOULDING USING PALM STEARIN BINDER SYSTEM. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) Characterization of Homogeneous for Metal Injection Molding (MIM) Process. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) Pengacuan suntikan logam (mim) bagi serbuk titanium dengan sistem bahan pengikat stearin sawit. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) Metal Injection Moulding of Titanium Using Palm Stearin Based Binder. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) Water atomised Stainless Steel Powder for Micro Metal Injection Molding. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) Penghasilan Titanium (Ti) Berbusa dengan menggunakan Kaedah Buburan. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2002) Comparison between Simulation and Actual Molding in Determine The Defects of Green Part In Metal Injection Moulding (MIM). In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) Producing of titanium foam using titanium alloy (Al3Ti) by slurry method. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) The Influence of SS316L�s Particle Shape on the Injection Molding of a Composite Binder Feedstock. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) OPTIMISATION OF PROCESSING PARAMETERS OF TITANIUM FOAMS USING TAGUCHI METHOD FOR IMPROVED ELECTRICAL CONDUCTIVITY. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) MOILDING PARAMETER OPTIMISATION FOR THE BEST SINTERED DENSITY. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) OPTIMISATION OF MICRO METAL INJECTION MOLDING FOR HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) MAGNESIUM ALLOY METAL INJECTION MOLDING USING WAX-BASED BINDER SYSTEM. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) OPTIMISATION OF INJECTION PARAMETER IN METAL INJECTION MOLDING (MIM) PROCESS. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) SINTERING PARAMETER OPTIMIZATION WITH QUALITY ENGINEERING TECHNIQUE: BEST FLEXURE STRENGTH. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) OPTIMISATION OF THE SINTERING PARAMETERS FOR DENSITY OF TITANIUM FOAMS USING TAGUCHI METHOD. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2009) INJECTION MOLDING PARAMETER OPTIMIZATION OF TITANIUM ALLOY POWDER MIX WITH PALM STEARIN AND POLYETHYLENE FOR GREEN DEFECTS USING TAGUCHI METHOD. In: UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2005) Characterization of Homogeneous for Metal Injection Molding (MIM)Process-Research Report. UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2008) An Influence Of The SS316L Powder Particle Shape To The Densification Of Metal Injection Moulding (MIM) Compact. In: UNSPECIFIED UNSPECIFIED.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Comparison between Simulation and Actual Molding in Determine The Defects of Green Part In Metal Injection Moulding (MIM). ISSN 0126-9909

NOR, NOR HAFIEZ BIN MOHAMAD Injection Molding Parameter Optimization of Titanium Alloy Powder Mix with Palm Stearin and Polyethylene for Multiple Performance Using Grey Relational Analysis.

NOR, NOR HAFIEZ BIN MOHAMAD (2004) Metal Injection Moulding Of ZK60 Magnesium Alloy Powder Using Palm Stearin Based Binder System. Advanced Materials Research, 3 (1). ISSN 1675-2414

NOR, NOR HAFIEZ BIN MOHAMAD Multiple Performance Optimization for the Best Metal Injection Molding (MIM) Green Compact. ISSN 0128-5610

NOR, NOR HAFIEZ BIN MOHAMAD (2009) OPTIMISATION OF PROCESSING PARAMETERS OF TITANIUM FOAMS USING TAGUCHI METHOD FOR IMPROVED ELECTRICAL CONDUCTIVITY. ISSN 0167-9317

NOR, NOR HAFIEZ BIN MOHAMAD (2007) OPTIMIZING THE INJECTION PARAMETER OF WATER ATOMISED SS316L POWDER WITH DESIGN OF EXPERIMENT METHOD FOR BEST SINTERED DENSITY. Chiang Mai Journal of Science, Faculty of Science, Chiang Mai University, 1.

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Orthogonal Array Technique for Optimizing the Sintering Parameter of the Metal Injection Molding (MIM) Compact: Best Flexure Strength. ISSN 1985-2517

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Pengacuan suntikan logam (mim) bagi serbuk titanium dengan sistem bahan pengikat stearin sawit. ISSN 1394-9713

NOR, NOR HAFIEZ BIN MOHAMAD (2010) Producing of titanium foam using titanium alloy (Al3Ti) by slurry method. ISSN (doi:10.1063/1.3491802)