Metal injection moulding of NiTi alloy from elemental powder of nickel and titanium using palm stearin based binder system / Rosliza Razali
This study presents the processing of NiTi alloy from elemental powder of Nickel (Ni) and Titanium (Ti) mixed with binder system of Palm Stearin (PS) and polyethylene (PE) by using Metal Injection Moulding (MIM) process. The processing of NiTi alloys from elemental Ni and Ti powder mixtures by powde...
| मुख्य लेखक: | Razali, Rosliza |
|---|---|
| स्वरूप: | थीसिस |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2016
|
| विषय: | |
| ऑनलाइन पहुंच: | https://ir.uitm.edu.my/id/eprint/18792/1/TM_ROSLIZA%20RAZALI%20EH%2016_5.pdf |
समान संसाधन
Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
द्वारा: Subuki, Istikamah
प्रकाशित: (2010)
द्वारा: Subuki, Istikamah
प्रकाशित: (2010)
TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir
द्वारा: Abdul Kadir, Ros Atikah
प्रकाशित: (2017)
द्वारा: Abdul Kadir, Ros Atikah
प्रकाशित: (2017)
Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin
द्वारा: Jamaludin, Mohamad Ikhwan
प्रकाशित: (2015)
द्वारा: Jamaludin, Mohamad Ikhwan
प्रकाशित: (2015)
Pseudoelasticity And Cyclic Behaviours Of Nickel-Rich NiTi Shape Memory Alloy
द्वारा: Hishamiakim, Mohamad
प्रकाशित: (2019)
द्वारा: Hishamiakim, Mohamad
प्रकाशित: (2019)
Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys
द्वारा: Nawawi, Nazihah
प्रकाशित: (2014)
द्वारा: Nawawi, Nazihah
प्रकाशित: (2014)
Effect Of Ni3ti Formation On The Oxidation Kinetics Of Niti Shape Memory Alloys
द्वारा: Nawawi, Nazihah
प्रकाशित: (2014)
द्वारा: Nawawi, Nazihah
प्रकाशित: (2014)
An investigation of the performance of NiTi shape memory alloy based bone fixation device
द्वारा: Yong, Thian Haw
प्रकाशित: (2015)
द्वारा: Yong, Thian Haw
प्रकाशित: (2015)
Parameters study on the fabrication of Nickel-Titanium Shape Memory Alloy Core-Sheath Friction Yarn (NiTi-SMA CSFY) via dref spinning machine / Mohammad Harris M. Yahya
द्वारा: M. Yahya, Mohammad Harris
प्रकाशित: (2016)
द्वारा: M. Yahya, Mohammad Harris
प्रकाशित: (2016)
Characterisation of stainless steel 316L and palm stearin based binder by using metal injection molding (MIM) process
द्वारा: Musa Zainal Abidin, Murni Farahin
प्रकाशित: (2014)
द्वारा: Musa Zainal Abidin, Murni Farahin
प्रकाशित: (2014)
Gradient Ageing Of Ni-Rich Niti Shape Memory Alloy
द्वारा: Razali, Muhammad Fauzinizam
प्रकाशित: (2013)
द्वारा: Razali, Muhammad Fauzinizam
प्रकाशित: (2013)
Injection Molding of Stainless Steel (SUS 316L) Powder Using a Thermoplastic Binder System
द्वारा: Ibrahim, Rosdi
प्रकाशित: (2002)
द्वारा: Ibrahim, Rosdi
प्रकाशित: (2002)
Optimization Of Injection Moulding Process For Hdpe Moulded Gear
द्वारा: Kassim, Mohd Syahir Mohd
प्रकाशित: (2015)
द्वारा: Kassim, Mohd Syahir Mohd
प्रकाशित: (2015)
Effect Of Aluminium (Al) And Nickel (Ni) Addition On Formation Of Titanium Silicon Carbide (Ti3sic2) Via Arc Melting
द्वारा: Mazuki, Norlailatullaili
प्रकाशित: (2012)
द्वारा: Mazuki, Norlailatullaili
प्रकाशित: (2012)
Esterification of palm fatty acid distillate by using manganese oxide and nickel oxide supported on zirconia for biodiesel production
द्वारा: Al-Jaberi, Salam Hussein Hayder
प्रकाशित: (2017)
द्वारा: Al-Jaberi, Salam Hussein Hayder
प्रकाशित: (2017)
Simulation of plastic injection moulding of family mould using moldflow and design of experiment
द्वारा: Mohd. Badri , Mohd. Najib
प्रकाशित: (2010)
द्वारा: Mohd. Badri , Mohd. Najib
प्रकाशित: (2010)
Effect Of Injection Moulding Parameters On Warpage Deflection
द्वारा: Mohd Sani, Siti Salmah
प्रकाशित: (2015)
द्वारा: Mohd Sani, Siti Salmah
प्रकाशित: (2015)
Separation and identification of chemicals compound obtained from selected bio oil / Airin Aezzira Kamaruzzaman
द्वारा: Kamaruzzaman, Airin Aezzira
प्रकाशित: (2016)
द्वारा: Kamaruzzaman, Airin Aezzira
प्रकाशित: (2016)
Simultaneous SO₂/NOₓ removal from flue gas using catalyzed adsorbents
द्वारा: Silas, Kiman
प्रकाशित: (2019)
द्वारा: Silas, Kiman
प्रकाशित: (2019)
Design and Analysis of Plastic Injection Mould for Holder Casing
द्वारा: Wong, Choon Tat
प्रकाशित: (2004)
द्वारा: Wong, Choon Tat
प्रकाशित: (2004)
Design and development of embedded system to control motorized CNG-air mixer for diesel dual-fuel engine
द्वारा: Al-Saadi, Abdulwahab A. Abdulrahman
प्रकाशित: (2018)
द्वारा: Al-Saadi, Abdulwahab A. Abdulrahman
प्रकाशित: (2018)
Optimization of injection moulding parameters for recycled high density polyethylene
द्वारा: Ramle, Zuraimi
प्रकाशित: (2017)
द्वारा: Ramle, Zuraimi
प्रकाशित: (2017)
Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method
द्वारा: Wan Azhari, Wan Noor Azrina
प्रकाशित: (2016)
द्वारा: Wan Azhari, Wan Noor Azrina
प्रकाशित: (2016)
Synthesis and characterization of egusi melon methyl ester as diesel fuel substitute
द्वारा: Giwa, Solomon Olanrewaju
प्रकाशित: (2009)
द्वारा: Giwa, Solomon Olanrewaju
प्रकाशित: (2009)
Development of control strategy of electronic control unit for compressed natural gas direct injection engine
द्वारा: Hassan, Mohd Khair
प्रकाशित: (2011)
द्वारा: Hassan, Mohd Khair
प्रकाशित: (2011)
Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen
द्वारा: Mohd Ariffin, Mohd Khairol Anuar
प्रकाशित: (2001)
द्वारा: Mohd Ariffin, Mohd Khairol Anuar
प्रकाशित: (2001)
Cost analysis software development for injection moulding in the concurrent engineering environment
द्वारा: Zamrah, Zarak Shaifuddin
प्रकाशित: (2009)
द्वारा: Zamrah, Zarak Shaifuddin
प्रकाशित: (2009)
Simulation of plastic injection moulding part using moldflow and design of experiment
द्वारा: Halim , Shamsul Azwan
प्रकाशित: (2010)
द्वारा: Halim , Shamsul Azwan
प्रकाशित: (2010)
Optimisation of injection moulding process parameters using taguchi and desirability function
द्वारा: Vivekanandan, Panneerselvam
प्रकाशित: (2020)
द्वारा: Vivekanandan, Panneerselvam
प्रकाशित: (2020)
Properties of wood plastic composite produced using injection moulding process
द्वारा: Hang, Chit Meng
प्रकाशित: (2010)
द्वारा: Hang, Chit Meng
प्रकाशित: (2010)
Performance evaluation of conformal and straight cooling channels on injection moulded part
द्वारा: Abd. Rahim, Shayfull Zamree
प्रकाशित: (2015)
द्वारा: Abd. Rahim, Shayfull Zamree
प्रकाशित: (2015)
Ground fuel characteristics of burnt peat in Raja Musa Forest Reserve, Selangor, Malaysia
द्वारा: Musa, Dayang Nur Sakinah
प्रकाशित: (2016)
द्वारा: Musa, Dayang Nur Sakinah
प्रकाशित: (2016)
System integration and counter-mass balance of fuel cell powered UAV / Mohd Hafiz Hussin
द्वारा: Hussin, Mohd Hafiz
प्रकाशित: (2009)
द्वारा: Hussin, Mohd Hafiz
प्रकाशित: (2009)
Characterisation of treated spent lubricating oil using activated volcanic mud / Noor Harliza Abd Razak
द्वारा: Abd Razak, Noor Harliza
प्रकाशित: (2009)
द्वारा: Abd Razak, Noor Harliza
प्रकाशित: (2009)
Synthesis of hierarchical nanozeolites beta and ZSM-5 for green diesel production via hydrodeoxygenation
द्वारा: Arumugam, Mahashanon
प्रकाशित: (2018)
द्वारा: Arumugam, Mahashanon
प्रकाशित: (2018)
Microstructures and properties of CoCrMo alloy by metal injection moulding process
द्वारा: Nur Aidah Nabihah, Dandang
प्रकाशित: (2019)
द्वारा: Nur Aidah Nabihah, Dandang
प्रकाशित: (2019)
Injection moulding simulation of wood–filled polypropylene thin-walled composite parts
द्वारा: Md Deros, Mohd Azaman
प्रकाशित: (2015)
द्वारा: Md Deros, Mohd Azaman
प्रकाशित: (2015)
Injection moulding parameters and performance of rice husk-high density polyethylene composite
द्वारा: Mat Isa, Naurah
प्रकाशित: (2006)
द्वारा: Mat Isa, Naurah
प्रकाशित: (2006)
Numerical study of combustion characteristics and emission in diesel engine using LPG-hydrogen-diesel fuel mixture
द्वारा: Abd Al-Reda, Radhwan Ali
प्रकाशित: (2017)
द्वारा: Abd Al-Reda, Radhwan Ali
प्रकाशित: (2017)
Development of supported nickel-based catalysts for deoxygenation of waste cooking oil to renewable fuel production
द्वारा: Wan Khalit, Wan Nor Adira
प्रकाशित: (2022)
द्वारा: Wan Khalit, Wan Nor Adira
प्रकाशित: (2022)
Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
द्वारा: Mehat, Nik Mizamzul
प्रकाशित: (2010)
द्वारा: Mehat, Nik Mizamzul
प्रकाशित: (2010)
समान संसाधन
-
Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
द्वारा: Subuki, Istikamah
प्रकाशित: (2010) -
TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir
द्वारा: Abdul Kadir, Ros Atikah
प्रकाशित: (2017) -
Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin
द्वारा: Jamaludin, Mohamad Ikhwan
प्रकाशित: (2015) -
Pseudoelasticity And Cyclic Behaviours Of Nickel-Rich NiTi Shape Memory Alloy
द्वारा: Hishamiakim, Mohamad
प्रकाशित: (2019) -
Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys
द्वारा: Nawawi, Nazihah
प्रकाशित: (2014)