Metal injection moulding of NiTi alloy from elemental powder of nickel and titanium using palm stearin based binder system / Rosliza Razali

This study presents the processing of NiTi alloy from elemental powder of Nickel (Ni) and Titanium (Ti) mixed with binder system of Palm Stearin (PS) and polyethylene (PE) by using Metal Injection Moulding (MIM) process. The processing of NiTi alloys from elemental Ni and Ti powder mixtures by powde...

Description complète

Détails bibliographiques
Auteur principal:	Razali, Rosliza
Format:	Thèse
Langue:	anglais
Publié:	2016
Sujets:	Chemical engineering Fuel
Accès en ligne:	https://ir.uitm.edu.my/id/eprint/18792/1/TM_ROSLIZA%20RAZALI%20EH%2016_5.pdf

Documents similaires

Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
par: Subuki, Istikamah
Publié: (2010)

TiH2 microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir
par: Abdul Kadir, Ros Atikah
Publié: (2017)

Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin
par: Jamaludin, Mohamad Ikhwan
Publié: (2015)

Pseudoelasticity And Cyclic Behaviours Of Nickel-Rich NiTi Shape Memory Alloy
par: Hishamiakim, Mohamad
Publié: (2019)

Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys
par: Nawawi, Nazihah
Publié: (2014)

Gender differences in communication patterns in job interviews / Rosliza Rosli
par: Rosliza, Rosli
Publié: (2011)

Characterisation of stainless steel 316L and palm stearin based binder by using metal injection molding (MIM) process
par: Musa Zainal Abidin, Murni Farahin
Publié: (2014)

Parameters study on the fabrication of Nickel-Titanium Shape Memory Alloy Core-Sheath Friction Yarn (NiTi-SMA CSFY) via dref spinning machine / Mohammad Harris M. Yahya
par: M. Yahya, Mohammad Harris
Publié: (2016)

Effect Of Ni3ti Formation On The Oxidation Kinetics Of Niti Shape Memory Alloys
par: Nawawi, Nazihah
Publié: (2014)

An investigation of the performance of NiTi shape memory alloy based bone fixation device
par: Yong, Thian Haw
Publié: (2015)

Metodologi pengajian syariah di Pondok Moden, Kandis, Bachok, Kelantan / Rosliza@Rosli Mahmud.
par: Mahmud, Rosliza
Publié: (2005)

Gradient Ageing Of Ni-Rich Niti Shape Memory Alloy
par: Razali, Muhammad Fauzinizam
Publié: (2013)

Injection Molding of Stainless Steel (SUS 316L) Powder Using a Thermoplastic Binder System
par: Ibrahim, Rosdi
Publié: (2002)

Optimization Of Injection Moulding Process For Hdpe Moulded Gear
par: Kassim, Mohd Syahir Mohd
Publié: (2015)

Esterification of palm fatty acid distillate by using manganese oxide and nickel oxide supported on zirconia for biodiesel production
par: Al-Jaberi, Salam Hussein Hayder
Publié: (2017)

Simulation of plastic injection moulding of family mould using moldflow and design of experiment
par: Mohd. Badri , Mohd. Najib
Publié: (2010)

Effect Of Injection Moulding Parameters On Warpage Deflection
par: Mohd Sani, Siti Salmah
Publié: (2015)

Separation and identification of chemicals compound obtained from selected bio oil / Airin Aezzira Kamaruzzaman
par: Kamaruzzaman, Airin Aezzira
Publié: (2016)

Effect Of Aluminium (Al) And Nickel (Ni) Addition On Formation Of Titanium Silicon Carbide (Ti3sic2) Via Arc Melting
par: Mazuki, Norlailatullaili
Publié: (2012)

Simultaneous SO₂/NOₓ removal from flue gas using catalyzed adsorbents
par: Silas, Kiman
Publié: (2019)

Design and Analysis of Plastic Injection Mould for Holder Casing
par: Wong, Choon Tat
Publié: (2004)

Design and development of embedded system to control motorized CNG-air mixer for diesel dual-fuel engine
par: Al-Saadi, Abdulwahab A. Abdulrahman
Publié: (2018)

Synthesis and characterization of egusi melon methyl ester as diesel fuel substitute
par: Giwa, Solomon Olanrewaju
Publié: (2009)

Optimization of injection moulding parameters for recycled high density polyethylene
par: Ramle, Zuraimi
Publié: (2017)

Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method
par: Wan Azhari, Wan Noor Azrina
Publié: (2016)

Development of control strategy of electronic control unit for compressed natural gas direct injection engine
par: Hassan, Mohd Khair
Publié: (2011)

Ground fuel characteristics of burnt peat in Raja Musa Forest Reserve, Selangor, Malaysia
par: Musa, Dayang Nur Sakinah
Publié: (2016)

System integration and counter-mass balance of fuel cell powered UAV / Mohd Hafiz Hussin
par: Hussin, Mohd Hafiz
Publié: (2009)

Characterisation of treated spent lubricating oil using activated volcanic mud / Noor Harliza Abd Razak
par: Abd Razak, Noor Harliza
Publié: (2009)

Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen
par: Mohd Ariffin, Mohd Khairol Anuar
Publié: (2001)

Cost analysis software development for injection moulding in the concurrent engineering environment
par: Zamrah, Zarak Shaifuddin
Publié: (2009)

Simulation of plastic injection moulding part using moldflow and design of experiment
par: Halim , Shamsul Azwan
Publié: (2010)

Optimisation of injection moulding process parameters using taguchi and desirability function
par: Vivekanandan, Panneerselvam
Publié: (2020)

Properties of wood plastic composite produced using injection moulding process
par: Hang, Chit Meng
Publié: (2010)

Performance evaluation of conformal and straight cooling channels on injection moulded part
par: Abd. Rahim, Shayfull Zamree
Publié: (2015)

Process optimization in rubber injection moulding manufacturing / Ng Yeow Chian
par: Ng, Yeow Chian
Publié: (2019)

Synthesis of hierarchical nanozeolites beta and ZSM-5 for green diesel production via hydrodeoxygenation
par: Arumugam, Mahashanon
Publié: (2018)

Electrochemical performance of binder-free polyaniline based electrode for supercapacitor application / Syaza Amira Razali
par: Syaza Amira , Razali
Publié: (2019)

Microstructures and properties of CoCrMo alloy by metal injection moulding process
par: Nur Aidah Nabihah, Dandang
Publié: (2019)

Injection moulding simulation of wood–filled polypropylene thin-walled composite parts
par: Md Deros, Mohd Azaman
Publié: (2015)