Laser cladding of tool steel for grain boundary stability

Laser cladding is one of the best methods to modify the steel surface for enhanced thermal stability properties. Added carbide particle impeded the grain boundary migration which often occurred in metastable modified microstructure at high working temperature. In this thesis, an experimental study o...

書目詳細資料
主要作者:	Fazliana, Fauzun
格式:	Thesis
語言:	英语
出版:	2021
主題:	TA Engineering (General). Civil engineering (General) TJ Mechanical engineering and machinery TS Manufactures
在線閱讀:	http://umpir.ump.edu.my/id/eprint/38980/1/ir.Laser%20cladding%20of%20tool%20steel%20for%20grain%20boundary%20stability.pdf

相似書籍

Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser
由: Fazliana, Fauzun
出版: (2015)

Investigation of laser cutting parameters on surface quality of stainless steel
由: Anuar, Azman
出版: (2010)

Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel
由: Shamsudin, Zuraidy
出版: (2007)

Effect of tool length on plain turning performance
由: Ibrahim, Norfaizem
出版: (2010)

Effect of cutting parameters on the surface integrity of ground AISI 1148 steel
由: Ismail, Mohd. Rozaimi
出版: (2010)

Performance and evaluation of graphite when machining hardened steel ASSAB 718
由: Saeed Ahmed, Radwan Ahmed
出版: (2009)

Thermal fatigue of laser modified tool steels mould surface at high temperature
由: Annie, Lau Sheng
出版: (2020)

Performance evaluation of carbide tool in end milling of medium density fiberboard
由: Yusoff, Salahuddin
出版: (2010)

Performance evaluation of diamond cutting tools when ultra precision grinding spherical part
由: Chia, Chon Yue
出版: (2010)

Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
由: Mohd Noor Firdaus, Haron
出版: (2021)

Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V
由: Rashiddy Wong, Freddawati
出版: (2008)

Application of clad/unclad optical fiber in the corrosion studies of reinforced concrete rebars
由: Mokhtar, Kamran
出版: (2010)

A generalized laser simulator algorithm for optimal path planning in constraints environment
由: Aisha, Muhammad
出版: (2022)

Effect of Wire Electrical Discharge Machining (WEDM) parameters and additive treatment on surface roughness and dimensional stability of tool steel
由: Chew, Seow Lee
出版: (2013)

Microcutting performance monitoring – investigation on tool failure criterion
由: Ainur Munira, Rosli
出版: (2022)

Evaluation of glass nano/microstructures replication fidelity after laser-assisted hot embossing process
由: Lee, May Shian Helen
出版: (2023)

Evaluation of ceramic cutting tool performance when turning tool steels
由: Konneh, Mohamed
出版: (1998)

Mechanical properties and thermal stability of rPET/HDPE plastic composite
由: Nik Ruqiyah, Nik Hassan
出版: (2020)

Integrated assessment of MIG welding parameters on carbon steel using RSM optimization
由: Junita, Mohd Said
出版: (2023)

Evaluation of light guide plate (lgp) micropattern form accuracy fabricated via direct co2 laser structuring
由: Norfazilasari, Yasman
出版: (2025)

Path towards an attainable quality : the effect of tooling design on the product competency and process efficiency
由: Tamilarasi, Arasu
出版: (2023)

Performance evaluation of coated carbide cutting tools when turning hardened tool steel
由: Tang, Yu Cai
出版: (2006)

Experimental study on hard turning of hardened tool steel with coated carbide cutting tools
由: K. Seveen, K. Muniswaran
出版: (2007)

Performance evaluation of wiper coated ceramic tool when hard turning tool steel
由: Saad Elmunafi, Mohamed Handawi
出版: (2010)

Experimental study of oil film thickness on workpiece under minimum quantity lubrication milling process using laser induced fluorescence method
由: Nur Izzati Khoirunnisa, Ismail
出版: (2022)

Plasma spray of nicraly coating on laser surface modified H13 tool steel
由: Mohamed Reza Zalani, Mohamed Suffian
出版: (2022)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2004)

Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel
由: Mohd. Yusof, Noordin
出版: (2003)

Enhancing flange length in stamping of high strength steel sheets sm520b using stretch flanging method
由: Mohd Syafiq, Yusoff
出版: (2020)

Effect of edge preparation when hard turning tool steel
由: Shaari, Mohd. Rosmani
出版: (2010)

Development of cubic boron nitride coating on cutting tool steel
由: Ramdan, Raden Dadan
出版: (2004)

Tool wear and tool life performance of TiA1N coated carbide cutting tools when turning XW 42 hardened tool steel
由: Effendy, Effendy
出版: (2007)

Effect of selective laser melting process parameters on properties of 316L stainless steel
由: Nurul Kamariah, Md Saiful Islam
出版: (2020)

Performance evaluation of coated ceramic cutting tools with T-land edge preparation when turning hardened tool steel
由: Wan Abdul Rahaman, Wan Emri
出版: (2006)

Equipment and process performance improvement using automated monitoring system
由: Poobalan, Prakash
出版: (2009)

Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment
由: Ramanathan, Geeva Raj
出版: (2009)

Investigation on quality of hydroxyapatite adhesion on investment casting mould
由: Lotfabadi, Amir Fereidouni
出版: (2008)

Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061
由: Ahamed, Ahmad Fauzi
出版: (2010)

Design of new interlocking bricks making machine
由: Ramli, Mohd. Ridhwan
出版: (2010)

Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes
由: Idris, Siti Rabiatull Aisha
出版: (2008)