Numerical Investigation On The Effects Of Geometrical Parameters On Film Cooling Performance
The aim of this study is to investigate the effect of different kinds of cooling holes and staggered arrangements on adiabatic and conjugate film cooling effectiveness for convex surface of gas turbine blade. The investigation included a new cooling hole scheme called heart-shaped to solve the vorte...
| मुख्य लेखक: | Ali, Amir Hussein |
|---|---|
| स्वरूप: | थीसिस |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2013
|
| विषय: | |
| ऑनलाइन पहुंच: | http://eprints.usm.my/40938/ |
समान संसाधन
Finite Volume Based Numerical Investigation On The Effects Of Internal Cooling And Film Cooling On The Thermal Performance Of Gas
Turbine Blades
द्वारा: Shaker, Sufian Farid
प्रकाशित: (2010)
द्वारा: Shaker, Sufian Farid
प्रकाशित: (2010)
Experimental And Numerical Investigation For
Cooling Performance Of High Power Light
Emitting Diode (Led) Arrays Using Heat Sink
द्वारा: Mohamad, Muhammad Sofwan
प्रकाशित: (2012)
द्वारा: Mohamad, Muhammad Sofwan
प्रकाशित: (2012)
Numerical And Experimental Analyses Of Piezoelectric Fans For Microelectronics Cooling
द्वारा: Ramana, Maram Venkata
प्रकाशित: (2010)
द्वारा: Ramana, Maram Venkata
प्रकाशित: (2010)
Numerical And Experimental Investigations Of 2d Membrane Airfoil Performance
द्वारा: Abdul Aziz, Mohd Sharizal
प्रकाशित: (2012)
द्वारा: Abdul Aziz, Mohd Sharizal
प्रकाशित: (2012)
Numerical And Experimental Investigation Of 2D Membrane Airfoil Performance
द्वारा: Aziz, Mohd Sharizal Abdul
प्रकाशित: (2012)
द्वारा: Aziz, Mohd Sharizal Abdul
प्रकाशित: (2012)
Experimental and numerical investigations on mixing flow of film cooling by using twisted holes
द्वारा: Abdul Wahid, Ammar Fakhir
प्रकाशित: (2016)
द्वारा: Abdul Wahid, Ammar Fakhir
प्रकाशित: (2016)
Experimental And Numerical Investigations On The Performance Of Flexible Skin Flapping Wing For Micro Aerial Vehicle Application
द्वारा: Yusoff, Hamid
प्रकाशित: (2013)
द्वारा: Yusoff, Hamid
प्रकाशित: (2013)
Numerical Investigation Of Heat And Mass Transfer In
Porous Medium Fixed With Various Geometries
द्वारा: Magami, Irfan Anjum Badruddin
प्रकाशित: (2006)
द्वारा: Magami, Irfan Anjum Badruddin
प्रकाशित: (2006)
Numerical analysis of film cooling effectiveness using compound cooling holes at the end of gas turbine engine combustor
द्वारा: Salimi, Shahin
प्रकाशित: (2014)
द्वारा: Salimi, Shahin
प्रकाशित: (2014)
Thermal And Flow Analysis Of
Piezoelectric Fans For Cooling LEDS
Packages
द्वारा: Shaker , Sufian Farid
प्रकाशित: (2014)
द्वारा: Shaker , Sufian Farid
प्रकाशित: (2014)
Experimental And Numerical Nvestigations Of Loop Heat Pipe Performance With Nanofluids
द्वारा: Gunnasegaran, Prem
प्रकाशित: (2016)
द्वारा: Gunnasegaran, Prem
प्रकाशित: (2016)
Numerical And Experimental Study On A Continuous Single Bubble Rising Behavior With And Without Heat Transfer Effect
द्वारा: Ismail, Nazmi Che
प्रकाशित: (2014)
द्वारा: Ismail, Nazmi Che
प्रकाशित: (2014)
Study On The Accuracy Of Squeeze Film Damping Calculation With Finite Element Analysis
द्वारा: Harun, Muhammad Syakir
प्रकाशित: (2013)
द्वारा: Harun, Muhammad Syakir
प्रकाशित: (2013)
Kajian parameter sistem alatan pengisar menggunakan konsep goncangan.
द्वारा: Priyanto, Sugeng
प्रकाशित: (2011)
द्वारा: Priyanto, Sugeng
प्रकाशित: (2011)
Investigation of brake squeal/self induced vibrations.
द्वारा: Mohammed, Ammar Abdul Majeed Yousif
प्रकाशित: (2011)
द्वारा: Mohammed, Ammar Abdul Majeed Yousif
प्रकाशित: (2011)
Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
द्वारा: Mehat, Nik Mizamzul
प्रकाशित: (2010)
द्वारा: Mehat, Nik Mizamzul
प्रकाशित: (2010)
Investigation Of The Fluid/Structure Interaction In Moulded Underfill Process
द्वारा: Khor, Chu Yee
प्रकाशित: (2013)
द्वारा: Khor, Chu Yee
प्रकाशित: (2013)
Experimental And Numerical Studies On Thermal Analysis Of Heat Pipes For Computer Cooling Applications
द्वारा: Elnaggar, Mohamed H. A.
प्रकाशित: (2012)
द्वारा: Elnaggar, Mohamed H. A.
प्रकाशित: (2012)
An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
द्वारा: Jamaludin, Amirul Aliff
प्रकाशित: (2015)
द्वारा: Jamaludin, Amirul Aliff
प्रकाशित: (2015)
An Integration Of Taguchi Method And Grey Relational Analysis In Optimizing Injection Moulding Processing Parameter Of Recycled Plastic
द्वारा: Zakarria, Noor Syuhadah
प्रकाशित: (2014)
द्वारा: Zakarria, Noor Syuhadah
प्रकाशित: (2014)
Study Of Processing Parameters In Manufacturing Of Flat Glass-Epoxy Composite Laminates Using Vacuum Bagging Oven Curing
द्वारा: Hanafiah, Nur Hafzareen Md
प्रकाशित: (2013)
द्वारा: Hanafiah, Nur Hafzareen Md
प्रकाशित: (2013)
Feasibility Study Of Reprocessed Acrylonitrile Butadiene Styrene (ABS) And Optimization Of Injection Moulding Parameters Via Taguchi Method
द्वारा: Ng, Chin Fei
प्रकाशित: (2011)
द्वारा: Ng, Chin Fei
प्रकाशित: (2011)
Investigation Of Non-Uniform Thickness Section Effect On Twist Springback Behaviour
द्वारा: Nashrudin, Muhammad Nazmi
प्रकाशित: (2018)
द्वारा: Nashrudin, Muhammad Nazmi
प्रकाशित: (2018)
Investigation Of Wire Sweep During Pbga Encapsulation Process Using Fluid Structure Interaction
द्वारा: Ramdan, Dadan
प्रकाशित: (2013)
द्वारा: Ramdan, Dadan
प्रकाशित: (2013)
Investigation Of Water Flow Over Contracted Rectangular Flat-Crested Slit Weir In Open Channel
द्वारा: Jaafar , Rosley
प्रकाशित: (2009)
द्वारा: Jaafar , Rosley
प्रकाशित: (2009)
Computational study of turbine blade film cooling performance using anisotropic turbulence models
द्वारा: Sundaraj, Chandran
प्रकाशित: (2006)
द्वारा: Sundaraj, Chandran
प्रकाशित: (2006)
Design And Verification Of An Oscillating Wear Tester To Stimulate The Piston-Cylinder Tribology In Internal Combustion Engines
द्वारा: Al-Tmeemi, Bhaa Alden Hussein Ali
प्रकाशित: (2011)
द्वारा: Al-Tmeemi, Bhaa Alden Hussein Ali
प्रकाशित: (2011)
Thermal Performance Analysis And
Characterization For
Mobile Radio
द्वारा: Chee, Jiunn Shyong
प्रकाशित: (2013)
द्वारा: Chee, Jiunn Shyong
प्रकाशित: (2013)
Thermal Performance Analysis And
Characterization For
Mobile Radio
द्वारा: Chee, Jiunn Shyong
प्रकाशित: (2013)
द्वारा: Chee, Jiunn Shyong
प्रकाशित: (2013)
Performance And Emission Of Coated Porous Medium Burner With Cogeneration
द्वारा: Ismail, Ahmad Kamal
प्रकाशित: (2016)
द्वारा: Ismail, Ahmad Kamal
प्रकाशित: (2016)
Performance & Emission Characteristic Of
Emulsified Biofuel Application In Diesel Engine
द्वारा: Hamid, Mohd Fadzli
प्रकाशित: (2017)
द्वारा: Hamid, Mohd Fadzli
प्रकाशित: (2017)
Integration Of Overall Equipment Effectiveness
(Oee) And Reliability For Measuring Machine
Effectiveness
द्वारा: Samat, Hasnida Ab
प्रकाशित: (2010)
द्वारा: Samat, Hasnida Ab
प्रकाशित: (2010)
Performance Of An Alumina Ball Packed Bed
Porous Media Burner Fueled By Producer Gas
द्वारा: Ho, John Chung Eng
प्रकाशित: (2012)
द्वारा: Ho, John Chung Eng
प्रकाशित: (2012)
Design And Performance Analysis Of A Small Two-Stroke Direct Injection Diesel Engine.
द्वारा: Loh, Jian Haur
प्रकाशित: (2011)
द्वारा: Loh, Jian Haur
प्रकाशित: (2011)
Dither Effect Of Drum Brake Squeal
द्वारा: Teoh , Choe Yung
प्रकाशित: (2015)
द्वारा: Teoh , Choe Yung
प्रकाशित: (2015)
Performance And Agglomeration Study Of Oil Palm Empty
Fruit Bunch In A Bubbling Fluidized Bed Gasifier
द्वारा: Amiri, Pooya Lahijani
प्रकाशित: (2011)
द्वारा: Amiri, Pooya Lahijani
प्रकाशित: (2011)
Numerical Simulation And Experimental Investigations On The Effect Of Polypropylene Rheology In The Injection Molding Process
द्वारा: Rusdi, Mohd Syakirin
प्रकाशित: (2014)
द्वारा: Rusdi, Mohd Syakirin
प्रकाशित: (2014)
Study On The Development Of Ceramic Cutting
Tool (zta I Zta-mgo) And Its Machining
Performance In Slot Milling
द्वारा: Hassan, Mohd Nor Hakim
प्रकाशित: (2010)
द्वारा: Hassan, Mohd Nor Hakim
प्रकाशित: (2010)
Analysis Of Vibro-Acoustic Effect Of
Micro-Perforated Panel Sound
Absorber
द्वारा: Tan, Wei Hong
प्रकाशित: (2013)
द्वारा: Tan, Wei Hong
प्रकाशित: (2013)
Topology Optimization Of Spinal Interbody Cage For Reducing Stress Shielding Effect
द्वारा: Chuah, Hun Guan
प्रकाशित: (2009)
द्वारा: Chuah, Hun Guan
प्रकाशित: (2009)
समान संसाधन
-
Finite Volume Based Numerical Investigation On The Effects Of Internal Cooling And Film Cooling On The Thermal Performance Of Gas
Turbine Blades
द्वारा: Shaker, Sufian Farid
प्रकाशित: (2010) -
Experimental And Numerical Investigation For
Cooling Performance Of High Power Light
Emitting Diode (Led) Arrays Using Heat Sink
द्वारा: Mohamad, Muhammad Sofwan
प्रकाशित: (2012) -
Numerical And Experimental Analyses Of Piezoelectric Fans For Microelectronics Cooling
द्वारा: Ramana, Maram Venkata
प्रकाशित: (2010) -
Numerical And Experimental Investigations Of 2d Membrane Airfoil Performance
द्वारा: Abdul Aziz, Mohd Sharizal
प्रकाशित: (2012) -
Numerical And Experimental Investigation Of 2D Membrane Airfoil Performance
द्वारा: Aziz, Mohd Sharizal Abdul
प्रकाशित: (2012)