The Characterisrics And Failure Mechanisms Of Creep And Creep-Thermal Cycling Of Superheater Tube

Most of superheated tubes of power plants using oil as fuel have premature failures usually caused by mechanical and corrosion failure. The application of superheated boiler tube includes a sequence of events such as fluctuating stress levels at constant temperature, fluctuating temperature levels a...

Description complète

Détails bibliographiques
Auteur principal:	Suprapto, Agus
Format:	Thèse
Publié:	2000
Sujets:	TJ Mechanical engineering and machinery

Documents similaires

Creep-rupture behavior of AISI 347 austenitic stainless steel foils at different temperature and stress levels
par: Osman, Ali Hassan
Publié: (2011)

Influence of notch constraint on creep damage evolution and rupture life of grade 91 steel
par: Imam, Ul Ferdous
Publié: (2022)

The creep behaviour of high strength concrete
par: Ahmad, Hazrina
Publié: (2004)

Effect of tube inclination angle on the thermal and fluid dynamic performance of flat tube heat exchanger
par: Ahmed Yousif Adam, Mohammed
Publié: (2017)

Creep and thermal response of long span prestressed concrete integral abutment bridge
par: Muhammad, Akilu
Publié: (2017)

Creep test facility development and creep analysis of braced composite cross arms in 132 kV transmission tower
par: Muhammad Rizal, Muhammad Asyraf
Publié: (2021)

Creep characteristics of austenitic stainless steel foil at elevated temperature
par: Shahrul Azhar, Ilya Izyan
Publié: (2013)

Creep and shrinkage performance of kenaf bio fibrous concrete composite
par: Babatunde, Ogunbode Ezekiel
Publié: (2017)

Creep and shrinkage performance of kenaf bio fibrous concrete composites
par: Babatunde, Ogunbode Ezekiel
Publié: (2017)

Effect of dwell period on fatigue life of 316l stainless steel tube at high temperature under creep condition
par: Mohammad, Khairul Azhar
Publié: (2014)

Damage mechanics based approach in failure predication of draw forming procecesses
par: Abu Shah, Ismail
Publié: (2017)

Influence of chemical and mineral admixtures on shrinkage and creep of prepacked aggregate concrete
par: Hossein, Aslani
Publié: (2013)

Development of creep and shrinkage prediction model for Malaysian normal strength concrete
par: Khoo, Hui Kiang
Publié: (2006)

Studies On Binder Creep, Abrasion Loss And Dynamic Stripping Of Porous Asphalt
par: Hasan, Mohd Rosli Mohd
Publié: (2011)

Influence of CaCO₃ in glass fibre/unsaturated polyester composite on thermal and flexural creep behaviour
par: Johari, Ahmad Nazrin
Publié: (2019)

Damage mechanics-based failure model for sheet metals under large plastic deformation
par: Omran, Abdoulhdi Amhmad Borhana
Publié: (2014)

Damage mechanics-based model for the deformation response and failure of composite honeycomb core structure
par: Khan, Muhammad Salman
Publié: (2021)

Influence of flaky aggregate towards creep and resilient modulus on asphalt concrete 20
par: Mahmud, Mohd. Zul Hanif
Publié: (2013)

Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder
par: Abdullah, Nabihah
Publié: (2019)

Effect of indium addition on microstructure, wettability, shear strength and creep behavior of sn100c solder
par: Abdullah, Nabihah
Publié: (2019)

Improvement on pressure distribution for venturi tube flow
par: Hamedan, Hazrel
Publié: (2017)

The effect of outer surface roughness for evaporator tube in the desalination plant
par: Lim, Chih Hoo
Publié: (2015)

Creep assessment of overheated grade 9Cr steels for decision making on plant integrity
par: Ng, Guat Peng
Publié: (2014)

Aggregate flakiness influences on AC14 towards resilient and creep modulus
par: Abd. Rahman, Muhammad Faiz
Publié: (2013)

Impact characteristic and energy absorption of auxetic foam-filled square tubes
par: Mohsenizadeh, Saeid
Publié: (2015)

Crashworthiness performance of optimized auxetic foamfilled tubes under axial loadings
par: Mohsenizadeh, Saeid
Publié: (2019)

Ejector refrigeration cycle for automotive air conditioning
par: Maziar, Reza
Publié: (2012)

Laminar flow heat transfer enhancement in multy-start spirally corrugated tubes
par: Kareem, Zaid Sattar
Publié: (2016)

Failure analysis of a submersible pump shaft
par: Jayabalan, J. Kulasegaran
Publié: (2007)

Failure of composite domes under internal pressure
par: Gohari, Soheil
Publié: (2011)

Vibration induced fatigue failure piping system
par: Yap, Weng Suon
Publié: (2013)

Failure analysis of notched composite plates with bushings
par: Hooshyarfard, Hooman
Publié: (2013)

Vibration induced fatigue failure in piping system
par: Yap, Weng Suon
Publié: (2013)

Development of product life - cycle cost analysis tool
par: Hussein, Ahmed Yussuf
Publié: (2009)

Ideal cycle analysis of a pulse detonation engine
par: Moghadam, Maryam Sadrzadeh
Publié: (2014)

Heat transfer enhancement by using nanofluids flow and conical ring inserts in circular tubes
par: Ibrahim Abuobeida Mohammed Ali, Abuobeida
Publié: (2013)

Dynamics characteristics and energy absorption of fibre-metal-laminate (FML) thin-walled tubes
par: Mohd. Bahari, Zaili
Publié: (2015)

Energy absorption capability of multi-cell thin-walled tube under lateral loading
par: Mohd. Sofi, Muhammad Izzuddin
Publié: (2019)

Experimental determination of creep fatigue life of 316L stainless steel pipe
par: Mohammad, Khairul Azhar
Publié: (2011)

Thermodynamic cycle analysis of Pulse Detonation Engine (PDE) by biogas
par: Suhiri, Farahdatul Sahuda
Publié: (2015)